"नये भारत का नया Tender Portal"
Autcion Sale Of Reinforcement Steel Product Type - Metal Category - Iron And Steel
Autcion Sale Of Reinforcement Steel Bar Product Type - Metal Category - Iron And Ste
"earth Work In Excavation By Mechanical Means (hydraulic Excavator )/ Manual Means In Foundation Trenches Or Drains (not Exceeding 1.5 M In Width Or 10 Sum On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter. All Kinds Of Soils " P.c.c. In Foundation Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Complete In Spcified Grade Excluding The Cost Of Centering And Shuttering All Work Upto Plinth Level 1:4:8(1 Cement:4 Coarse Sand :8 Gradeed Stone Aggregate 40 Mm Nominal Size). Random Rubble Stone Masonry For With Hard Stone In Foundation And Plinth In Cement Sand Mortar Above 30 Cm Thick Wall In Cement Mortat 1:6 (1-cement: 6- Sand) Dpc:-providing And Laying In Position Specified Grade Of Cement Concrete For All Rcc Structural Elements Upto Plinth Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers (if Required Excluding The Cost Of Centering, Shuttering And Reinforcement . M20 Grade Nominal Mix/design Mix. Stone Masonry In Super Structurerandom Rubble Stone Masonry With Hard Stone In Superstucture Above Plinth Level And Upto Five Level Wall Upto 30 Cm And Less Thickness Cement Sand Mortar 1:6 (1-cement: 6- Sand) Pillar Masonary:-random Rubble Stone Masonry With Hard Stone In Superstucture Above Plinth Level And Upto Five Level For Square Or Rectangular Pillers Cement Sand Mortar 1:4 (1-cement: 4- Sand) Supplying And Fixing Stone Lintels/bed Plates Of Approved Quarry Rough Dressed In Cement Mortar 1:4 :upto 15 Cm. Thick. " Beams:-providing And Laying In Position Specified Grade Of Cement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement For Beams, Suspended Floors, Roofs, Griders Having Slopes Up To 15º, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases Etc. M20 Grade Nominal Mix / Design Mix" Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Props And Removal Of Formwork For Upto Floor Five Level For :suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands, Coping Bed Plates, Anchor Blocks, Sills, Chhajjas, Lintel, Beam, Plinth Beam Etc. Steel Reinforcement:-p/f Reinforcement For Rcc Work Including Straightening,cutting, Bending, Placing In Position And Binding (including Cost Of Binding Wire) All Complete Upto Floor Five Levetmt Bars (conforming Of Relevent Is Code). Door Frames:-providing And Fixing In Cm 1 : 4 Double Paitam (rebated) Stone Door Window And Ventilator Frames Of Approved Quarry :size 100 X 75mm. Doors:-providing And Fixing M.s. Sheet 1mm Thick Double Leaf Door Shutter In Angle Iron Frame 35x35x5mm Suitabilly Diagonally Braced With 25x3mm Flat Iron Above And Below Lock Rail Of Size 50x5mm Beading Extra Including All Fittings, As Per Direction Of Engg. Incharge But Excluding Cost Of Chowkhats: Including Two Coats Of Anit-corrosive Red Oxide Primer Paint Glazed Window:providing And Fixing Steel Glazed Doors Windows And Ventilator Shutters Of Standard Rolled Steel Section Joints Mitred And Welded With Steel Lugs 13x3mm, 10cm. Long Embedded In Cement Concrete Block 15x10x10cm. Of 1:3:6 (1cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20mm Nominal Size) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws With Fixing Clips Or With Bolts And Nuts As Required Including Providing And Fixing Of Plain Glass Panes 4mm Thick With Cooper Glazing Clips And Special Metal Sash Putty Of Approved Make Or Metal Beading With Screws Complete Including Priming Coat Of Approval Steel Primer, Excluding The Cost Of Metal Beading And Other Fitting Except Necessary Hinges Of Pivots Steel Handles Peg Stay Etc. As Required :partly Fixed And Partly Openable [ Fixed Area Not To Exceed 33%] Wire Gauge Supplying & Fixing Fixed Wire Gauge Of 14 Mesh X 24 Gauge To The Metal Frame Of Rolled Section By Metal Beading 20x3mm With Suitable Screw At Not Exceeding 150mm Distance. Guard Bars: P&f Square Bars Or Other Flat Welded To Window/ventilators Etc., Guard Bar 12 X12mm Supplying And Filling In Plinth With Sandy Soil Free From Deleterious And Organic Material Under Floors Including Watering Ramming Consolidating And Dressing Complete Including Cost Of Sandy Soil With All Lead And Lift. Stone Kharanja: Rr Dry Stone Kharanja Under Floor Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm (average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) For Area Of Each Slab From 2001 To 5000 Sq.cm Kota Stone Slabs 25 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (average) Thick Cement Mortar 1:3 (1 Cement 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete(for Area Of Each Slab Upto 2001 Sqcm) Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished : 20 Mm Thick Plaster(ceiling): 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 (1 Cement: 3 Fine Sand) Black Board : Plaster On New Surface On Wall In Cement Sand Mortar 1:3 Including Raking Of Joints Etc. Complete Fine Finish: 12mm Thick Grading Roof For Water Proofing Treatment With Water Proffing Compound: Cement Concrete 1: 2: 4 (1 Cement: 2 Course Sand: 4 Greded Stone Aggregate 20 Mm Nominal Size) Gola Providing Gola 75mm X 75mm In Cement Concrete 1:2:4(1 Cement: 2 Coarse Sand: 4 Stone Aggregate 10 Mm And Down Gauge) Including Finished With Cement Mortar 1:3(1 Cement: 2 Fine Sand) As Per Standard Design. "distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: New Work (two Or More Coats) Over And Including Scrapping And Priming Coat With Cement Primer." Exterior Finishing: Painting Exterior Surface Of Wall With 100% Acrylic Exterior Paint Of Approved Brand And Manufacture To Give An Even Shade With Two Or More Coats Including Sand Papering, Prime Coat, Making Smooth Surface With Cement Based Putty Etc Complete In All Respect: New Work Panting On Doors & Windows :- Painting With Syntheitic Enamel Paint Of Approved Brand And Manufacture In All Shade To Give An Even Shade New Steel Work (2 Or More Coat On New Work). Copping: Cement Concrete Flooring 1:2:4 (1 Cement: 2 Course Sand: 4 Greded Stone Aggregate) Finishing With A Floating Coat Of Neat Cement Including Cement Slurry, Making Of Lines Or Groove Etc. Complete But Excluding The Cost Of Nosing Of Steps Etc. Complete : 40mm Thick With 20mm Thick Nominal Size Aggregate. Making Grooves As Per Design In Plaster 10mm To 20mm Wide. Making Of Drip Course (tapka) In Cement Sand Mortar 1:6 Width Upto 40 Mm And 10 Mm Thick As Per Approved Design Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete P&f Rigid Pvc Pipe (is:4985 Mark) Class Ii/ (4 Kg. /cm2.) Approved Quality /make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110mm Dia Wiring Of Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point As Per Pwd Specification For Electrical Works With Isi Marked 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade (is:694) And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit & It's All Accessories( J.b. , Bends Etc.) , Round Tiles,18 Swg Hot Dipped Galvanized Modular Box With Earth Terminal, 6 A Modular Switch, Modular Face Plate With Grid Plate, 3 Pin Ceiling Rose / Lamp Holder/ 3 Pin Connector , Screws Etc, Making Connections,all As Per Pre Approved By Engineer In Charge, Testing Etc. Complete As Required. For Specification Of Copper Conductor, Phenolic Laminated Sheet's & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 . For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . Short Point (up To 3 Mtr.) Medium Point (up To 6 Mtr) Long Point (up To 10 Mtr) Wiring Of 3/5 Pin 6 Amp. Light Plug Point As Per Pwd Specification For Electrical Works With Isi Marked 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade (is:694) And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit & It's All Accessories( J.b. , Bends Etc.) , Round Tiles,18 Swg G.i. Box With Earth Terminal Of Required Size, 6 A Switch, 3/5 Pin 6 A Socket, 3.0 Mm Thick Isi Marked Phenolic Laminated Sheet (is : 2036 - 1995), Al. Alloy/ Cadmium Plated Iron Screws 20 Mm Cup Washers Etc. All As Per Pre Approved By Engineer In Charge, Making Connections, Testing Etc. Complete As Required. For Specification Of Copper Conductor, Phenolic Laminated Sheet's & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . On Board S&f Following Sizes (dia.) Of Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit As Per Pwd Specification For Electrical Works Along With Its Accessories (is: 3419 ) As Required In Recess Including Cutting The Wall, Covering Conduit And Making Good The Same As Required. All Relative And Latest Acceptance Tests Reports By Any Nabl Accredited Lab For The Conduit Shall Be Submitted Before Execution & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . Mms (9537 P-111)pvc Condute.25mm. Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.99% Purity Copper, Class 5 Stranding In Acc. To Iec 60228 For Lower Watt Loss , Oxygen Free ( <10 Ppm) For Less Chances Of Oxidization And Higher Silver Content For Gives Better Conductivity , Insulation Pvc Type A ,flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Vde 0298 Part 4, , In Existing Surface Or Recessed Pvc/ Ms Conduit/casing Capping Including All As Per Pre Approved By Engineer In Charge,making Connections, Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . 2 X1.5 Sqmm Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.99% Purity Copper, Class 5 Stranding In Acc. To Iec 60228 For Lower Watt Loss , Oxygen Free ( <10 Ppm) For Less Chances Of Oxidization And Higher Silver Content For Gives Better Conductivity , Insulation Pvc Type A ,flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Vde 0298 Part 4, , In Existing Surface Or Recessed Pvc/ Ms Conduit/casing Capping Including All As Per Pre Approved By Engineer In Charge,making Connections, Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . 2 X2.5 Sqmm Providing & Fixing Of 240/415 V Ac Mcb With Positive Isolation Of Breaking Capacity Not Less Than 10 Ka (b/ C Tripping Characteristic As Per Type Of Load And Site Requirement) 4kv Impulse Withstand Voltage, As Per Pwd Specification For Electrical Works With Isi Marked Is 8828(1996) / Conforming To Iec 60898-1 2002, Iec 60947-2, Low Watt Losses, Trip Free Mechanisum , Energy Limiting Of Class 3 As Per Iec, Minimum Phase Termination Capacity Of 35sq.mm. , Conductorline Load Reversibility, Label Holding Facility , Ip 20 Contact Protection And Fitted With Existing Distribution Board/sheets, Min. Operation 20,000 Upto 32 A Rating And 10,000 Upto 63 A, 5000 For 80 A Rating Including Making Connections, Testing Etc. As Required. . Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Test Reports Before Execution & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr .6a To 32a Rating. Providing & Fixing Of Ip20 Smd Mid Power Led Batten Type Integrated Light Fixture Made From Polycarbonate /extruded Aluminium Powder Coated Housing With In Built Driver , Power Consumption Of 18w/20w ,system Lumen Efficacy = 120 Lm/watt Output, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,thd < 10% ,p.f.=0.95, Cri >80 , Life Time Of Minimum 50000 Burning Hours With , 70% Of Intial Lumen Maintaned Till Life Ends , Cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as Per Ansi Bin) , Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Bis Standard And Trade Mark Certificate ( T.c.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. 1170mm(+/-10%) Led Batten With Min. Lumen Output 2200 Lm Providing & Fixing Of Energy Efficient /energy Saving Ip 20 Led Direct Retrofit Bulb In Existing Holder Or Fixture As Required With System Lumen Efficacy =100 Lm/watt Output ,pf 0.95 , Cri >70, Minimum Life Time Of Minimum 25000 Burning Hours With , 70% Of Intial Lumen Maintaned Till Life Ends , Cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as Per Ansi Bin) , Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Bis Standard And Trade Mark Certificate ( T.c.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (lm79/lm80) Certificate / Report From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge . For Additional Technical Parameters Of Product/ Work, Refer Annexure "a" Attacheded With This Bsr.6/7 Watt Providing & Laying P.v.c. / Xlpe Insulated & P.v.c. Sheathed Un-arrmoured Aluminium Cable Confirming To Is:1554 P-i / Is :7098 P - I Of 1.1 Kv With H4- Grade Electrolytic Aluminium Conductor Confirming To Is 8130 Of Purity >99.6 %, Inner / Outer Sheath Confirming To Is:5831 In Existing Rcc / Hume / Stoneware / Pvc Pipe/ Open Duct/cable Trench / Cable Tray (with Cable Tie) Including Testing Etc. As Required Of Following Size. Oem Must Have It's Own In House Nabl Accrediated Laboratory For Testing Procedure As Per Is:10810. For Additional Technical Parameters Of Product / Work Refer Annexure 'a' Attached With This Bsr 6.0 Sq. Mm 4 Core Providing & Fixing Of Bee Star Rated Copper Wounded Double Ball Bearing Capacitor Start, Aluminium Body & Metallic Blade Ceiling Fan Conforming To All The Performance Requirements Laid Down In Is 374:2019 Including All Amendments, As Applicable ; & Carry Bis Licensing (i.e. Isi Marking) With Down Rod Up To 80 Cm With Secondary Support Safety Cable ( Steel Rope) , Cotter Pin With 3 X 1.5 Sq.mm Pvc Insulated Flexible Copper Conductor Making Connection Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . Providing & Fixing Of Isi Marked (is:1258) Batten/angle Lamp Holder With Cm/l No. Printed And Made Out From Industrial Grade Polycarbonate Or Fire Resistant Abs Material, Brass Terminal & Captive Screwsincluding Making Connection Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . P & F 1.2mm Thick M.s. Recessed Fan Box, Hexagonal/ Round Of Size 130 Mm Dia, Depth 75mm, 12 Mm Dia Rod Fan Hook With 100 Mm Length Extended On Each Side . All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure 'a' Attached With This Bsr Providing & Fixing Of 240/415 V Isolator As Per Pwd Specification For Electrical Works With Isi Marked Is:13947-iii/conforming To Iec 60947-3, Suitable For Ac22a Utilization Catagory, 4kv Impulse Withstand Voltage, True Contact Indication, Red Colour Dolly / Lever Shall Have Single Mould Covering Over All Poles For Operation , Two Position Din Rail Mounting, Minimum Phase Termination Capacity Of 35sq.mm. , Label Holding Facility , Ip 20 Contact Protection And Fitted With Existing Distribution Board / Sheet Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Test Reports Before Execution & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . 30/40 Amp Rating . Providing & Fixing Of Modular Type 120 W Step Fan Regulator Duly Isi Marked (is 11037:1984 ) With Cm/l No. Printed Made Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating , Including All As Per Pre Approved By Engineer In Charge,making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure 'a' Attached With This Bsr5 Step Fan Regulator 2 Module 360 Dgree Rotating P & F Isi Marked (is:3854) 6 Amp. Flush Type Non Modular Switch With Cm/l No. Printed And Made Out From Industrial Grade Polycarbonate Or Fire Resistant Abs Material Including Cutting Hole In Tile And Making Connection Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr . Providing & Fixing Of Of 3/5 Pin 6 Amp. Flush Type Non Modular Socket Made Out From Industrial Grade Polycarbonate Or Fire Resistant Abs Material, Brass Terminal With Porcelain Based Back Cover & Captive Screws Including Cutting Hole In Tile And Making Connection Testing Etc. As Required.all As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure "a" Attached With This Bsr .
Excavation And Sectioning Works, Supply And Construction Of Gsb Hiring Of Vibratory Roller. Pcc And Rcc For Drainage Works.Vdf Work Centering And Shuttering Works Steel Reinforcement Works Bitumen Sealant Work At Expansion Gap . Central Store Steel Yard Concreting Work
Gem Bids For Pvc Hoses Continuous Spring Steel Wire Reinforcement
Gem Bids For Custom Bid For Services - Vru Complete Loading Arm-2nos, Custom Bid For Services - Nrv 4 Inch For Vru-2nos, Custombid For Services - Ball Valve Of 2 Inch-4nos, Custom Bid Forservices - 4 Inch Ms Pipe-50 Mtr, Custom Bid For Services -4 Inch Elbow-4nos, Custom Bid For Services - 2 Inch Mspipe-30 Mtrs, Custom Bid For Services - 4 Inch Flanges -20nos, Custom Bid For Services - 2 Inch Flanges-30 Nos, Custom Bid For Services - 2 Inch Metallic Gasket- 20 Nos, Custom Bid For Services - Ball Valves Of 4 Inch Each-4 Nos, Custom Bid For Services - T Joint-2 Nos, Custom Bid Forservices - Welding In Pipes-500 In Dia, Custom Bid Forservices - Painting-80 Sq Mtr, Custom Bid For Services -supply Of Hydra-30 Hr, Custom Bid For Services -transportation Eqpmt Hisar To Bahadurgar-1 Lumpsum, Custom Bid For Services - Excavation Upto 1point5 Mtr-50 Cumtr, Custom Bid For Services - Rcc 1isto1point5isto3-25 Cumtr, Custom Bid For Services - Pcc-1isto2isto4-25 Cu Mtr, Custom Bid For Services - Steel For Structure/reinforcement-500kg, Custom Bid For Services - Fabrication Works-250india
Excavation For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 M. Beyond The Building Area And Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Filling, Ramming, Watering Including Shoring And Strutting Etc. Complete. By Mechanical Means (spec. No. : Bd.a. 1 Page 259/csr I Page No. 148) "excavation For Roadway In Earth, Soil Of All Sorts, Sand, Gravel Or Soft Murum Including Dressing Section To The Required Grade, Camber And Side Slopes And Conveying The Excavated Materials With All Lifts Upto A Lead Of 50m. And Spreading For Embankment Or Stacking As Directed." Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Filling Voids With Crushed Sand/grit, Ramming, Watering Etc. Complete. Providing And Laying Cast In Situ/ready Mix Cement Concrete In M-10 Of Trap/ Granite/ Quartzite/ Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Steel Centering, Formwork, Laying/pumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/concrete Batch Mix Plant (pan Mixer) Etc. Complete. With Fine Aggregate (crushed Sand Vsi Grade) Providing Selected Hard Murum Filling Including Laying In Layers Of 15 To 20cmwith Watering And Compacting Etc. Complete. Construction Of Granular Sub-base By Providing Close Graded Material, Mixing In A Mechanical Mix Plant At Omc, Carriage Of Mixed Material To Work Site, Spreading In Uniform Layers With Motor Grader/ Paver On Prepared Surface And Compacting With Vibratory Roller To Achieve The Desired Density, Complete As Per Clause 401 -- Plant Mix Method And Grading - I Material Providing And Laying In Situ / Ready Mix / Ready Mix M10 Cement Concrete Of Trap/ Granite/ Quartzite/ Gneiss Metal In Foundation Including Necessary Centering, Formwork, Bailing Out Water, Compacting And Curing Etc. Complete. (with Fully Automatic Micro Processor Based Plc With Scada Enabled With Reversible Drum Type Mixer/ Concrete Batch Mix Plant (pan Mixer) With Natural /artifical Sand) "providing And Fixing In Position Tmt - Fe - 500 Bar Reinforcement Of Various Diameters For R.c.c. Pile Caps, Footings, Foundations, Slabs, Beams Columns, Canopies, Staircase, Newels, Chajjas, Lintels Pardis, Copings, Fins, Arches Etc. As Per Detailed Designs, Drawings And Schedules. Including Cutting, Bending, Hooking The Bars, Binding With Wires Or Tack Welding And Supporting As Required Complete." Providing And Laying In Situ /ready Mix Cement Concrete M-20 Of Trap / Granite /quartzite/ Gneiss Metal For R.c.c. Work In Foundations Like Raft, Strip Foundations, Grillage And Footings Of R.c.c. Columns And Steel Stanchions Etc. Including Bailing Out Water, Steel Centering Formwork, Laying/pumping Cover Blocks, Compaction And Curing Roughening The Surface If Special Finish Is To Be Provided (excluding Reinforcement And Structural Steel) Etc. Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (pan Mixer) Etc. Complete. With Fine Aggregate (crushed Sand Vsi Grade) "providing And Laying Cast In Situ/ready Mix Cement Concrete M-20 Of Trap / Granite /quartzite/ Gneiss Metal For R.c.c. Columns As Per Detailed Designs And Drawing Or As Directed Including Steel Centering, Formwork, Cover Blocks, Laying/pumping, Compaction Finishing The Formed Surfaces With Cement Mortar 1:3 Of Sufficient Minimum Thickness To Give A Smooth And Even Surface Or Roughening If Special Finish Is To Be Provided And Curing Etc. Complete,(excluding Reinforcement And Structural Steel).with Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (pan Mixer) Etc. Complete. With Fine Aggregate (crushed Sand Vsi Grade)" "providing And Laying Cast In Situ/ready Mix Cement Concrete M-20 Of Trap / Granite /quartzite/ Gneiss Metal For R.c.c. Beams And Lintels As Per Detailed Designs And Drawings Or As Directed Including Steel Centering, Formwork, Cover Blocks, Laying/pumping, Compactionand Roughening The Surface If Special Finish Is To Be Provided And Curing Etc. Complete. (excluding Reinforcement And Structural Steel). With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (pan Mixer) Etc. Complete. With Fine Aggregate (crushed Sand Vsi Grade)" Providing Fly Ash Brick Masonry With Conventional/ I.s. Type Bricks In Cement Mortar 1:6 In Superstructure Including Striking Joints, Raking Out Joints, Watering And Scaffolding Etc. Complete Providing And Laying Cast In Situ/ready Mix Cement Concrete M-15 Of Trap/ Granite/quartzite/gneiss Metal For Coping To Plinth Or Parapet, Moulded Or Chamfered As Per Drawing Or As Directed Including Steel Centering, Plywood/ Steel Formwork Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing Uneven And Honeycombed Surface And Curing Etc. Complete. The Cement Mortar 1:3 Plaster Is Considered For Rendering Uneven And Honeycombed Surface Only. Newly Laid Concrete Shall Be Covered By Gunny Bag, Plastic, Tarpaulin Etc. (wooden Centering Will Not Be Allowed.) With Fine Aggregate (crushed Sand Vsi Grade) Providing And Fixing Mild Steel Grill Work For Windows, Ventilators Etc. 20 Kilogram/square Metre As Per Drawing Including Fixtures, Necessary Welding And Painting With One Coats Of Anticorrosive Paint And Two Coats Of Oil Painting Complete. Providing And Fixing Mild Steel Grill Gate With Angle Iron Frame 65mm X 65mm X 10mm With Iron Bars At 150mm C/c And Diagonal Flats As Per The Detailed Drawing Including Hinges, Pivot Block Locking Arrangement, Welding Riveting And Oil Painting Of Three Coats Of Approved Shade Weight Of Gate 35 Kilogram/smt. "providing Internal Cement Plaster 20mm Thick In Single Coats In Cement Mortar 1:4 Without Neeru Finish, To Concrete, Brick Surface, In All Positions Including Scaffolding And Curing Etc.complete." Providing And Fixing Heavy Duty Inter Locking Concrete Rubber Mould Glossy Paving Blocks Of 60 Millimeter Thickness Of Having A Strength Of 400 Kilogram/sq.m Of Approved Quality And Shape On A Bed Of Crushed Sand Of 25 To 30 Millimeter Thick Including Striking Joints And Cleaning Etc. Complete. (using 100% Crushed Sand) "providing And Applying Colour-wash Of Approved Colour And Shade In One Coat To New Surface Including Scaffolding, Brushing And Brooming Down (excluding Base Coats Of White Wash) Etc. Complete." Providing And Applying Plastic Emulsion Paint Of Approved Quality, Colour And Shade To New Surface In Three Coats Including Scaffolding, Preparing The Surface. (excluding Primer Coat) Etc. Complete. Providing And Applying Two Coats Of Lead/zinc Base Oil Paint/ Bituminous Paint Of Approved Colour And Shade To New Wood Work And Fiber Boards Including Preparing The Surface, Knotting, Scaffolding If Necessary, Excluding Primer Coat Etc. Complete. Providing Structural Steel Work In Trusses, Other Similar Trussed Purlins And Members With All Bracing, Gusset Plates Etc. As Per Detailed Designs And Drawings Or As Directed Including Cutting, Fabricating, Hoisting, Erecting Fixing In Position, Making Riveted/ Bolted/ Welded Connection And One Coat Of Anticorrosive Paint And Over It 2 Coats Of Oil Painting Approved Quality And Shade Etc. Complete. Providing And Fixing Plain Zinc Sheeting Of 0.80 Mm Thick (22 B.w.g.) Over The Ridge Hip Or Valley To Galvanized Iron Sheet Roofing Including All Fastening And Bolt Galvanised Iron Screws And Bolts, Lead And Bitumen Washers Etc. Complete.(weight Of 6.8 Kilogram/sq.m.). Providing , Laying And Fixing ,jointing Eco- Drain 200 Mm Sn 4 Nu- Drain Upvc Pipes Or Of Equivalent Make, Manufacture As Per En 13476 Or Equivalent As Per I.s.15328 With Fittings Such A Bends, Tees Tees, Coupler Etc, Jointing With Rubber Lubricant Including Necessary Excavation, Trench Refilling With Selective Excavated Materialetc. Complete. Providing And Constructing B.b.masonry Chamber With 100 Mm Thick 1:3:6 P.c.c. For Bed On 100 Mm Thick Oversizer Soaling With 80 Mm Metal Including Excavation, 23 Cm Thick B.b.masonry In C.m.1:6. Inside Plaster In C.m.1:5 20 Mm Thick And Outside Plaster B) 900 X 600 X 450 Mm Add For Extra Depth 150 Mm Providing And Fixing Precast 125 Mm Thick Slotted Covers Casted In M-30 With Reinforcement Of 10 Mm Dia Bars Both Way @ 150 Mm C/c Tied With Tack Welding, With 2 Hooks Of 12 Mm Dia Bars Finishing In C.m.1:3 Etc.complete. "providing And Laying Cast In Situ/ready Mixcement Concrete In M20 Of Trap/ Granite/quartzite/gneiss Metal For Steps Including Steel Centering, Formwork, Laying/pumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing Uneven And Honeycombed Surface And Curing Etc. Complete. The Cement Mortar 1:3 Plaster Is Considered For Rendering Uneven And Honeycombed Surface, Only. Newly Laid Concrete Shall Be Covered By Gunny Bag, Plastic, Tarpaulin Etc. (wooden Centering Will Not Be Allowed.), With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (pan Mixer) Etc. Complete. With Fine Aggregate (crushed Sand Vsi Grade)" Transportation Of Material Obtained From Debries Of Various Sorts Including Necessary Excavation / Loosing Including Loading,unloading And Conveying And Disposing As Directed. Providing And Fixing 90 Cm X 60 Cm Granite Plate Engraving 10 Cm. Height Letter, Figures Including Painting The Lefters/figures With Approved Colour And Shade Complete
Borewell Drilling 150 Mm Dia By Dth Machine Including Transporting Of Machine At Worksite, Providing & Placing 180 Mm Dia 6 Kg P.v C.casing Pipe (l5:4985-1988) & Fixing Borecap After Complation Of Borewell, Yield Testing Of Borewell By 90 Degree V Notch Method For Minimum 2 Hrs .continously, Providing Cap For 180 Mm Dia P.v.c.casing Pipe, Casing Pipe Lowering & Grouting, Solar System, Supplying, Installing, Testing And Commissioning Of Standalone Solar Submersible Pump Set . All The Above Benchmark Cost Are Inclusive Of Total Cost Of System As Per Mnre Specifications And Its Installation, Commissioning , Transportation , Insurance , Warranty/gurantee, Monitoring And Maintained For 5 Years. 3 Bhp Solar Pump Construction Of Bandhara, Clearing Cutting Thorny Shurbes, Bushes , Mooleyhills Etc. Complete, Excavation In Hard Murum/hard Man Kankar/pebbles, Exceeding 1.5m In Width Including Depositing The Material As Directed With All Lead Upto 15m And Lift Into 1.5m Including Boulders Of Size Less Than 0.10cum Including Dressing Etc Complete. Excavation In Soft Rock Exceeding 1.5m In Width Including Depositing The Material As Directed With All Leads And Lifts Including Boulders Of Size Less Than 0.10cum, Dressing Etc Complete. Excavation In Hard Rock Exceeding 1.5m In Width By Blasting Including Depositing The Excavated Material As Directed With All Leads And Lifts Including Boulders Of Size Exceeding 0.10cum Including Dressing Etc Complete Providing And Laying Rubble Soling Below Foundation In Layers Including Fillinf With Rubble Chips Murum Etc. Complete (excluding Royalty Material) Providing And Laying In Situ Cement Concrete Of Grade M-150 Of Trap / Granite / Gneiss /quartzite Graded Metal For Pcc With Or Without Surface Reinforcement Rcc/concreting Requiring Heavy Or Spetial Type Of Shuttering For Works Of Gallery ,sluice,spillway Crest,spillway Down Stream Face,energy Dissipating Structure,inteke Structure,training Walls,piers Abutments Etc.with Concrete Mixture Considering Lead Of 50 M With Shuttering And Scaffolding ,placing ,compacting,curing Etc.complete With An Initial Lead Of 50 M And Lift Of 1.50 M. Providing & Laying In Position Tor Steel Reinforcement Including Cutting Bending Binding Including Cost Of Reinforcement Binding Wire Etc Complete With A Lead Of 50 M & Lift Of 1.50 M Providing Casing Embankment Using Selected Previous Material Available Directly From Excavation In Layers Including Cost Of All Other Operations Such As Collection Of Material Spreading Material In Layer Of Specified Thickness Sorting Out Breaking Clods Levelling Sectioning Edges Sides Watering Compacting Each Layer To Density Control Of Not Less Than 95 Percent Or As Stipulated Using Vibratory Compactor Etc Complete With Lead Up To 1km For Watering And 6m Lift. Providing, Constructing Coffer Dam In River Basin / Dam Storages As Per Type Design Including Excavation, Filling, The Middle Portion With B. C. Soil (in Gunny Bags If Requried). Providing Impervious / Semipervious Materials On Both Side Of B.c. Soil (in Gunny Bags If Required) Including Ramming, Compacting To The Satisfaction Of Engineer-in-charge, Till The Complction Of Work Including Dismantling Coffer Dam After Completion Of Works And Disposing Off The Material As Directed By The Engineer-in-charge. Providing And Fixing 90 Cm X 60 Cm Marble Plate Engraving 10 Cm.height Letter ,figures Including Painting The Lefters/ Figures Withapproved Colour And Shade Complete " "rcc Well Providing And Laying In Situ Cement Concrete In Proporation .... Of Trap Metal For Foundation And Bedding, Including Balling Out Water Manually, Formwork, Compacting And Curing Etc. Complete." Providing & Costing In Constructing In Situ. C.c Of Trap Granite/ Quartzite / Gneiss/ Metal Of Approved Quality Of R.c.c. Work As Per Detailed Drawing & Design Or As Directed By Engg. In Charge Including Dewatering , Ceterind From Work,compacting, Finishing The Formed Surface With C.m. 1:3 Of Sufficient Minimum Thickness To Give A Smooth & Even Surface Wherever Necessary Or Roughening If Spetial Finish Is To Be Provided & Curing Etc. Complete. ( By Weight Batching & Mix Design For M-250 & M-300 Only Use Of L&t, Acc Ambuja, Birla Gold, Manikgad, Rajashree Etc. Cement Is Permitted Excluding M.s Or Tor Reinforcement In R.c.c. M-250grade. 1) R.c.c. M-250for Beam " 2) R.c.c. M-250 For Vertical Wall Providing & Fixing In Position Steel Bar Reinforcement Of Various Diameters For R.c.c. Pipes,caps,footing, Foundation, Slab, Beams, Columns, Canopies, Staircase, Newels, Chajjas, Lintels, Pardies, Coping, Fine Arches Etc. As Per Detailed Designs, Drawing & Schedule S Including Cutting, Bending, Hooking The Bars, Binding With Wires Or Tack Welding & Supporting As Required Etc. Complete (including Cost Of Binding Wire). Tor Steel" Providing & Laying Weep Holes Of 80 Mm Ac/pvc Pipe As Per Drawing For Abutment Returns, Return Walls Etc. Complete. Dewatering The Excavatyed Trenches And Pools Of Water By Using Pumps And Other Devices Including Disposing Of The Water To Safe Distance As Directed By Engineer-in-charge (including Cost Of Machinery Labour Fuel )etc Complete. Providing Rubble Stone Paving 15cm Thick In 1:3 Cement Mor Tar Over Bedding Of 15cm Thick Cement Concrete Of 1:4:8 Propor T Ion Wi Th T Rap / Grani Te / Quar Tzi Te / Gneiss Metal Including St R Iking Joints And Water Ing Etc. Complete." Providing Internal Cement Plaster 20mm. Thick In Two Coats In Cement Mor Tar 1:3 Wi Thout Neeru Finish, To Concrete, Br Ick Sur Face, In All Posi T Ions Including Scaffolding And Cur Ing Etc. Complete. Providing Uncoursed Rubble Masonry Of T Rap / Granite / Quartzite /gneiss Stones In Cement Mor Tar 1:6 In Foundation And Plinth Of Innerwalls / In Plinth Of External Walls Including Bailing Out Water Manually , Striking Joints On Un Exposed Faces And Water Ing Etc.complete." Reffiling The Trenches With Approved Excavated Material From Foundation In 15cm To 20cm Layers Including Watering And Compaction Etc. Complete. Providing And Fixing In Position C.i. Dapuri Steps Or 22 Mm Dia. M.s. Bar Step With Proper Anchorage, Etc. And Providing And Applying 3 Coats Of Anticorrosive Paint, Etc Complete As Directed By Engineer- In-charge." Providing And Fixing 90 Cm X 60 Cm Marble Plate Engraving 10 Cm. Height Letter, Figures Including Painting The Lefters/figures With Approved Colour And Shade Complete Providing, Constructing Coffer Dam In River Basin / Dam Storages As Per Type Design Including Excavation, Filling, The Middle Portion With B. C. Soil (in Gunny Bags If Requried). Providing Impervious / Semipervious Materials On Both Side Of B.c. Soil (in Gunny Bags If Required) Including Ramming, Compacting To The Satisfaction Of Engineer-in-charge, Till The Complction Of Work Including Dismantling Coffer Dam After Completion Of Works And Disposing Off The Material As Directed By The Engineer-in-charge. Lift 0.00 M To 1.50 M" "switch Room Excavation For Foundation / Pipe Trenches In Earth, Soils Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Upto A Distance Of 50 Metres And Lifts As Below, Stacking And Spreading As Directed, Normal Dewatering, Preparing The Bed For Foundation And Excluding Backfilling, Etc. Complete. (bd-a- 1/259)" Excavation For Foundation / Pipe Trenches In Hard Murum Including Removing The Excavated Material Upto A Distance Of 50 M And Lifts As Below, Stacking And Spreading As Directed By Engineer-in-charge, Normal Dewatering, Preparing The Bed For Foundation And Excluding Backfilling, Etc. Complete. (bd-a-2/259) Providing And Laying In Situ Cement Concrete In M – 15 (1:2:4) Grade Of Trap /granite/quartzite/gneiss Metal For Foundation & Bedding Including Bailing Out Water Manually, Form Work Compaction & Curing, Etc Complete. Providing Uncoursed Rubble Masonry Of T Rap / Granite / Quartzite /gneiss Stones In Cement Mor Tar 1:6 In Foundation And Plinth Of Innerwalls / In Plinth Of External Walls Including Bailing Out Water Manually , Striking Joints On Un Exposed Faces And Water Ing Etc.complete. "providing Second Class Burnt Brick Masonry With Convent Ional/ I.s.type Br Icks In Cement Mor Tar 1:6 In Superst Ructure Including Striking Joints, Raking Out Joints, Water Ing And Scaffolding Etc. Complete " Providing And Casiting In Situ Cc Of Trap /granite/quartzite/gneiss Metal Of Approved Quality For R Cc Work As Per Detailed Drawing And Designs Or As Diredcted By Engineer – In- Charge Including Normal Dewatering, Centering, Fromwork,compaction, Finishing The Formed Surface Withcm 1:3 Of Sufficient Minimum Thickness To Give A Smooth And Even Surface Wherever Necessary Or Roughening If Special Finish To Be Provided And Curing, Etc Complete. Slabs B) In Rcc M-200" Providing Internal Cement Plaster 20mm. Thick In Two Coats In Cement Mortar 1:3 Without Neeru Finish, To Concrete, Brick Surface, In All Positions Including Scaffolding And Cur Ing Etc. Complete. Item No 8 :- Filling The Plinth & Floors Murum Bedding In Trenches With Approved Murum From Excavatyed Materials Form Foundation 15 Cm. To 20 Cm. Layers Including Watering And Compaction Complete. Providing And Laying Cement Concrete Flooring 40 Mm Thick Wi Th M15 Cement Concrete Laid To Proper Level And Slope In Alternate Bays Including Compact Ion, Fi Lling Joints, Marking Lines To Give The Appearance Of T I Les Of 30 Cm X 30 Cm Or Other Size Laid Diagonally / Square Etc Finishing Smooth (wi Th Ext Ra Cement ) In Any Colour As Directed And Cur Ing Etc. Complete. With Natural Sand Providing And Fixing Frame Wi Th / Wi Thout Ventilator Of Size As Specified With Country Cut Teak Wood For Doors And Windows Including Chamfering, Rounding, Rebat Ing, Iron Holdfast Of Size 300mm X 40mm X5mm With Oil Paint Ing, Etc. Complete Item No. 11 :- Providing And Fixing Count Ry Cut Teak Wood Double Or Single Leaf Panelled Shut Ters, 35 Mm Thick Style Top And Freze Rail 95 X 35 Thick With Lock And Bottam Rail 195 X 25 Mm Thick And Panels Without Ventilator As Per Detai Led Drawing Excluding The Door Frame, Stainless Steel Fixtures And Fastening And Finishing The Wood Work Wi Th Oil Paint Ing 3 Coats Complete Item No. 12 :- Providing And Fixing Count Ry Cut Teak Wood Windows Wi Th Double Leaf 25 Mm Thick Planked Shutters Without Ventilators As Per Detailed Drawings Including Stainless Steel Fixtures And Fastenings And Finishingthe Wood Work Wi Th Oil Paint Ing 3 Coats Etc. Complete Item No.13 :- Providing Flush Grooved Pointing With Cement Mor Tar 1:3 For Stone Masonry Work Including Scaffolding And Curing Etc. Complete. Item No.14 :- Providing And Applying Washable Oil Bound Distemper Of Approved Colour And Shade To Old/ New Surfaces, In Three Coats Including Scaffolding, Preparing The Surface To Receive The Priming Coat And Finishing Coat Etc. Complete. Item No. 15 :- Providing And Fixing Locking Arrangement The Standered Qualityof Lock For Pump House, Etc Complete Item No. 16 :- Providing And Fixing In Position Steel Bar Reinforcement Of Various Diamenters For Rcc Piles, Caps, Footing, Foundation, Slabs, Beams, Columns, Canopies, Staircases, Newels,chjjas, Lintels, Pardies, Copings, Fins, Arches, Etc. As Per Detailed Designs, Drawings And Schedules, Including Cutting, Bending, Hooking He Bars, Binding With Wires Or Tack Welding And Supporting As Required, Etc. Complete.(including Cost Of Binding Wire) "pumping Machinery Item No. 1 :- Providing, Erecting And Giving Test Of Submersible Pump Set Conforming To Is 8034 And Motor Conforming To Is 9283, With Water Proof Winding. Pump Shall Be Suitable For Various Delivery Head And Discharge With Stainless Steel Shaft. Motor Suitable For Working On 415 V ± 10%, 3 Ph, 50 Hz A.c. Supply, With Cable Guard, Thrust Carbon / Fiber Bearing To Withstand Entire Hydraulic Thrust. The Pump Set Shall Be Suitable For Direct Coupling, With Suitable Suction Strainer. Pump Should Have Suitable Discharge Out Let As Per Manufacturer's Design. Antithrust Stream Lined Non Return Valve Shall Be Provided With The Pump. 3 M Submersible Copper Conductor Cable In Single / Double Run And 2 Pairs Of Suitable Size Erection Clamp 10 Mm Thick Shall Be Provided With Each Pump. Submersible Pump 150 Mm Dia (with Bronze / Stainless Steel (cf8m) Impeller) Up To 8 Stages" "item No. 2 :- Supplying And Erecting, Flat Flexible Submersible Cable With, Copper Conductor, Pvc Insulated, And Pvc Sheathed. 3 Core 10sqmm" "item No. 3 :- Supplying And Erecting Fully Automatic Star Delta Starter To Operate Squirrel Cage Induction Motor Working On 380- 440 Volt, 3 Phase, 50 Hz With No Volt Coil, Over Load Element, And On Off Push Buttons, With Necessary Material And Connected To Supply, Etc Complete. Starter With Original Sheet Steel Encloser. > 7.5 Hp & Up To 12.5 Hp" Item No.4 :- Providing , Installing & Commissioning Main Control Pannel Board Including V.meter & A. Meter Of Suitable Range Single Phase Prevention 8 Nos. Of Phase Indicater Lamps With Colour Glass Of 230 V Rotary Switch Over Load Capacitor Suitable For 7.50hp And 12.50bhp Pump Etc.complete. (market Rate) "item No.5 :- Providing, Erecting Pressure Gauge Of Required Range Complete With Syphon Tube, Isolating Cock Suitable For 12 Mm Dia G.i. Pipe. Pressure Gauge Shall Be Installed As Directed, With Tapping On Rising Main. Pressure Gauge (100 Mm Dia)" Item No.6 :- Providing Tools For Pumping. Item No. 7 :- Main Wiring Work From M. S. E. B. Cut Out To The Panel Board 4 Core X 459 Mm 1100 Grade With I. S. I. Mark Standard / Aluminum Armored Cable (94.1 P.36) Item No. 8 :- Providing Pipe Type Earthing With 40mm. Dia. G.l. Pipe Or 20 Mm Dia. G.l. Rod Complete With All Materials As Per Specification No. Ea-ep "solar Pump Item No.1 :-supplying, Installing, Testing And Commissioning Of Standalone Solar Submersible Pump Set . All The Above Benchmark Cost Are Inclusive Of Total Cost Of System As Per Mnre Specifications And Its Installation, Commissioning , Transportation , Insurance , Warranty/gurantee, Monitoring And Maintaince For 5 Years " "rising Main Item No. 1:- Providing And Supplying In Standard Lengths Polyethelene Pipes, Confirming To Is 4984 /14151 / 12786 / 13488 With Nesessary Jointing Material Like Mechanical Connector I. E. Thread / Insert Joint / Quick Release Coupler Joint / Compression Fitting Joint Or Flanged Joint Excluding Coupler/specials, Including Transportation And Freight Charges, Inspection Charges, Loading / Unloading Charges, Conveyance To The Departmental Stores & Stacking The Same In Closed Shade Duly Protecting From Sunrays & Rains, Excluding Gst Levied By Gi & Gom In All Respect Etc. Complete. 75 Mm Dia Hdpe Pipe 8 Kg/sqcm" 75 Mm Dia Hdpe Pipe 8 Kg/sqcm Item No.3 :- 5% Of Cost Of Pipes Shall Be Considered For Cost Of Pvc/hdpe Specials For Estimate Purpose Only. "item No. 4 :- Providing, Erecting, Connecting Double Flanged Short Body Pattern Tye Manually Operated Butterfly Valve Having Body, Disc And End Cover In Graded Cast Iron To Is 210 Gr. Cf 200 Generally Conforming In Bs 5155, Synthetic Rubber Faced Ring Secured On Disc By Retaining Ring With Stainless Steel Screw Stub Shaft Of Stainless Steel Riding In Teflon Bearings Excluding C.c. Foundation/ Structural Steel Support Confirming To Is 3095-1991. Sluice Valves 80 Mm Dia For Washout" "item No. 5 :- Providing And Supplying Air Valves As Per Is-10845 And Mjp’s Standard Specifications Of Approved Mark And Quality Of Following Diameters Including All Taxes (central And Local), Railway Fright, Inspection Charges Unloading From Railway Wagons, Loading Into Truck, Transportation Upto Departmental Stores/ Site, Unloading And Stacking Etc. Complete. Air Valves 15 Mm Dia" "item No.6 :- Excavation For Foundation/ Pipe Trenches In Earth, Soils Of All Types, Sand Gravel And Soft Murum, Including Removing The Excavated Material Upto A Distance Of 50 Meters & Lifts As Below, Stacking & Spreading As Directed, Normal Dewatering, Preparing The Bed For Foundation And Excluding Backfilling, Etc. Complete. (earth Soil)" "item No. 7 :- Excavation For Foundation/pipe Trenches In Hard Murum And Boulders, W.b.m. Road Including Removing The Excavated Material Upto A Distance Of 50 M Beyond The Area And Lifts As Below, Stacking And Spreading As Directed By Engineer-in-charge, Normal Dewatering, Preparing The Bed For Foundation And Excluding Back- Filling, Etc. Complete. (hard Murrum)" "item No.8 :- Excavation For Foundation/ Pipe Trenches In Soft Rock And Old Cement And Lime Masonry Foundation Asphalt Road Including Removing The Excavated Material Upto A Distance Of 50 M Beyond Area And Lifts As Below, Stacking As Directed By Engineer-in-charges, Normal Dewatering, Preparing The Bed For Foundation And Excluding Backfilling, Etc. Complete. Soft Rock" "item No.9 :- Excavation For Foundation / Pipe Trenches In Hard Rock By Controlled Blasting, Including Trimming And Levelling The Bed By Chiselling Where Necessary And Removing The Excavated Material And Stacking It In Measurable Heaps Within A Distance Of 50 Metres From The Area And Lifts As Below, Normal Dewatering, Excluding Backfilling, Etc. Complete. Lift 0 To 1.5 M Hard Rock" Item No. 10 :- Filling In Plinth And Floors Murum Bedding In Trenches With Approved Murum From Foundation 15 Cm To 20 Cm Layers Including Watering And Compaction Complete. "item No. 11 :- Lowering, Laying And Jointing H. D. P. E./ M. D. P. E. Pipes In Proper Position Including All Specials By Compression Fitting/electrofusion And Butt Fusion Jointing Procedure As Per Relevent Is Code Complete With All Materials For Jointing Procedure Like Electrofusion Machine, Electric Heater/butt Fusion Welding Machine With Hydraulic Jack, Top Loading Clamp Etc. And All Labours As Directed By Engineer In Charge As Per Is-7634 Part Ii 75 Mm Dia Hdpe Pipe 8 Kg/sqcm" 75 Mm Dia Hdpe Pipe 8 Kg/sqcm "item No. 12 :- Lowering Laying And Jointing In Position Following C.i.d/f Reflux Valves Butterfly Valves And Sluice Valves Including Cost Of All Labour Joining Material, Including Not Bolts And Giving Satisfactory Hydraulic Testing Etc. Complete. (rate For All Class Of Sluice Valves) Sluice Valves 80 Mm Dia For Washout" "item No. 13 :- Lowering, Laying And Fixing In Proper Alignment And Position All Types Of C.i. Air Valves As Directed By Engineer In-charge Including Cost Of Conveyance From Stores To Site Of Work, Cost Of All Material And Giving Satisfactory Hydraulic Testing, Etc Complete. Air Valves 15 Mm Dia" "item No. 14 :- Providing And Fixing In Position Air Valve Shaft Including Providing And Fixing Gi Medium Class Or 6 Mm Thick M.s. Pipe Shaft 2.70 M Long Over Branch Flange Of Air Valve Tee, Providing Pcc Block Of M-150 Concrete 150 Mm Thick Around The Air Valve Tee Including Encasing Of Vertical Shaft In Pcc M-150 As Shown In Type Design Together With Providing And Making Flanged Joints Wherever Required And Fixing Of Air Valve Over The Shaft Excluding Cost Of Air Valve And Branch Flanged Air Valve Tee. Etc. Complete As Per Type Design And As Directed By Engineer-in-charge For Following Diameters Of Pipe Lines (type Design Attached.) Upto 150 Mm On Murum & Harder Strata" Item No 15 :- Providing And Laying In Situ Following Grades Of C.c. Of Trap/granite/quartzite/gneiss Metal For Foundation And Bedding Including Dewatering, Form Work, Compacting And Curing, Finishing Etc. Complete. "item No. 15 :- Providing And Constructing B.b. Masonry Valve Chamber With 15 Cm Thick 1:3:6 Proportion Pcc Bedding, Including Excavation, B.b. Masonry In C.m. 1:5 Proportion 12 Mm Thick Cement Plaster In Cm 1:4 Proportion On Both Sides With Providing And Fixing C.i. Manhole Frame And Cover In Rcc 1:2:4 Coping Or Cm Thick Slab Etc. Complete As Directed By Engineer-in-charge. Size 0.90 X 0.60 X 1.20" Item No. 16 :- Refilling The Trenches With Available Excavated Stuff With Soft Material First Over Pipeline And Then Hard Material In 15 Cm Layers With All Leads And Lifts Including Consolidation, Surcharging, Etc. Complete "item No. 17 :- Hydraulic Testing Of H. D. P. E./ M. D. P. E. Pipe Line To Specified Pressure Including Cost Of All Materials And Labour And Water For Testing For Specified Length Including Cutting, Placing End Cap Making Arrangement For Filling Safe Water Using Reciprocating Type Pumps Which Should Be Able To Provide Specified Test Pressure Gauges And Other Necessary Equipments, Labour, Operation Charges, Etc. Required For Testing. The Rate Under This Item Shall Also Include Cost Of Retesting, If Necessary And Reinstating To Original Position. 75 Mm Dia Hdpe Pipe 8 Kg/sqcm" "distribution System Item No .1 :- Providing And Supplying In Standard Lengths Polyethelene Pipes, Confirming To Is 4984 / 14151 / 12786 / 13488 With Nesessary Jointing Material Like Mechanical Connector I.e. Thread / Insert Joint / Quick Release Coupler Joint / Compression Fitting Joint Or Flanged Joint Excluding Coupler/specials, Including Transportation And Freight Charges, Inspection Charges, Loading / Unloading Charges, Conveyance To The Departmental Stores & Stacking The Same In Closed Shade Duly Protecting From Sunrays & Rains, Excluding Gst Levied By Gi & Gom In All Respect Etc. Complete. 63 Mm Dia Hdpe Pipe 6 Kg/sqcm" Item No. 2 :- 5% Of Cost Of Pipes Shall Be Considered For Cost Of Pvc/hdpe Specials For Estimate Purpose Only. "item No.3 :- Providing Double Flange Sluice Valve Confirming For Is- 14846 Including Worn Gear Arrangements As Per Test Pressure, Stainless Steel Spindle, Caps, Including Inspection Charges, Transportation Upto Departmental Store, Unloading, Stacking Excluding Gst Levied By Goi & Gom In All Respect Etc. Complete Sluice Valves 50 Mm Dia" "item No 4 :- Excavation For Foundation / Pipe Trenches In Earth, Soils Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Upto A Distance Of 50 Metres And Lifts As Below, Stacking And Spreading As Directed, Normal Dewatering, Preparing The Bed For Foundation And Excluding Backfilling, Etc. Complete. (bd-a-1/259) Earth Soils" "item No. 5 :- Excavation For Foundation / Pipe Trenches In Hard Murum And Boulders, W.b.m. Road Including Removing The Excavated Material Upto A Distance Of 50 M Beyond The Area And Lifts As Below, Stacking And Spreading As Directed By Engineer-in-charge, Normal Dewatering, Preparing The Bed For Foundation And Excluding Backfilling, Etc. Complete. (bda-3/259) Hmb" "item No. 6 :- Excavation For Foundation / Pipe Trenches In Soft Rock And Old Cement And Lime Masonry Foundation Asphalt Road Including Removing The Excavated Material Upto A Distance Of 50 M Beyond The Area And Lifts As Below, Stacking As Directed By Engineer-incharge, Normal Dewatering, Preparing The Bed For Foundation And Excluding Backfilling, Etc. Complete. (bd-a-4/259) Soft Rock" "item No. 7 :- Excavation For Foundation / Pipe Trenches In Hard Rock And Concrete Road By Chiselling, Wedging, Line Drilling By Mechanical Means Or By All Means Other Than Blasting Including Trimming And Levelling The Bed, Removing The Excavated Material Upto A Distance Of 50 Metres Beyond The Area And Lifts As Below, Stacking As Directed By Engineer-in-charge, Normal Dewatering, Excluding Backfilling, Etc. Complete By All Means. (bd-a-6/259) Hard Rock" Item No. 8 :- Filling In Plinth And Floors Murum Bedding In Trenches With Approved Murum From Excavated Materials From Foundation In 15 Cm To 20 Cm Layers Including Watering And Compaction, Etc. Complete. (bd-a-10/263) "item No. 9 :- Lowering, Laying And Jointing H. D. P. E./m.d. P. E. Pipes In Proper Position Including All Specials By Compression Fitting/electrofusion And Butt Fusion Jointing Procedure As Per Relevent Is Code Complete With All Materials For Jointing Procedure Like Electrofusion Machine, Electric Heater/butt Fusion Welding Machine With Hydraulic Jack, Top Loading Clamp Etc. And All Labours As Directed By Engineer In Charge As Per Is-7634 Part Ii 63 Mm Dia Hdpe Pipe 6 Kg/sqcm" "item No. 10 :- Lowering, Laying And Jointing In Position Following C.i.d/f Reflex Valves, Butterfly Valves And Sluice Valves Including Cost Of All Labour Jointing Material, Including Nut Bolts And Giving Satisfactory Hydraulic Testing Etc. Complete. (rate For All Class Of Valves.) Sluice Valves 50 Mm Dia" "item No. 11 :- Providing And Laying In Situ Cement Concrete Of Trap/ Granite / Quartzite /gneiss Metal For Rcc Work In Foundation Like Raft, Grillage, Strip Foundation And Footing Of Rcc Columns And Steel Stanchions Including Normal Dewatering,form Work, Compaction, Finishing And Curing, Etc. Complete. (by Weigh Batching And Mix Design For M250 And M-300 Only. Use Of L&t, A.c.c., Ambuja, Birla Gold, Manikgad, Rajashree, Etc. Cement Is Permitted.) (excluding M.s. Or Tor Reinforcement) A) 1:2:4 (m-150) Grade " "item No. 12 :- Providing And Fixing C.i. Road Box Including Loading, Unloading And Carting To Site Of Work Including All Necessary Excavation In All Types Of Strata And Fixing In Murum Packing, Etc. Complete. 100 Mm X 225 Mm (20 Kg) " Item No. 13 :- Refilling The Trenches With Available Excavated Stuff With Soft Material First Over Pipeline And Then Hard Material In 15 Cm Layers With All Leads And Lifts Including Consolidation, Surcharging, Etc. Complete "item No. 14 :- Hydraulic Testing Of H. D. P. E./ M. D. P. E. Pipe Line To Specified Pressure Including Cost Of All Materials And Labour And Water For Testing For Specified Length Including Cutting, Placing End Cap Making Arrangement For Filling Safe Water Using Reciprocating Type Pumps Which Should Be Able To Provide Specified Test Pressure Gauges And Other Necessary Equipments, Labour, Operation Charges, Etc. Required For Testing. The Rate Under This Item Shall Also Include Cost Of Retesting, If Necessary And Reinstating To Original Position. 63 Mm Dia Hdpe Pipe 6 Kg/sqcm" Item No. 15 :- Providing And Fixing Board Displaying Information, Such As 'name Of Work, Tender Cost, Name Of Contractor, Work Completion And Liability Period Etc', Having Rectangular Shape Of 1.20 M X 0.90 M Size Made Out 18 Gauge (1.25 Mm) Thick Mild Steel Sheet Painted With One Coat Of Zinc Chromate Stoving Primer And Two Coats Of Enamel Paint On Front Side And Grey Stove Enamel On Back Side And Border /messages /symbols Etc. With Approved Colour Shade Paint Complete, On M.s.angle Of Size 35 X35 X3 Mm Frame With Properly Cross Braced M.s.angles Of Size 35 Mm X 35 Mm X 3 Mm Duly Painted Including Two M.s.angle Iron Posts Of Size 65 Mmx 65 Mmx 6 Mm, 3.65 M Long Painted Withal Ternate Black And White Bands Of 25 Cm Width Including All Fixtures Etc. And Fixing The Boards In 1:4:8 Concrete Block Of Size 60 Cm X 60 Cm X 75 Cm Including, Excavation, Refilling, Transportation, And Labour Etc Complete.spec. Number As Directed By Engineer In Charge Morth 801 Item No. 16 :- Providing And Making Upvc/mdpe Pipe Consumer Service Connection On Distribution Main By Drilling Hole With Suitable Means , Including All Labour , Upvc/mdpe Pipe Of Required Length With Or Without Road Crossing As Described Below, Including Cost Of Specials Like Saddle/clamp Saddle Of Suitable Material, And Diameter Suitable For Distribution Main, 15mm /20mm/ 25mm Respective Dia Heavy Duty Brass/polyprophylyne(twin Jacketed ) Ferrule , Male And Female Thread Adapter Elbow, Bends,couplers ,tees, Clamps Of Suitable Material And Sundry Materials As Per Requirment, Including Providing And Fixing Medium Duty 15.mm Brass Bib Tap, Gi Casing Pipe Of Suitable Diameter Of 32mm/ 40mm/ 50mm Respectively Of Required Length For Road Crossing, Including Requird Labour For Excavation In All Types Of Strata Up To The Depth Of 0.75m Or As Per Site Requirement,all Types Of Plumbing Fittings, Refilling , Closing The Water Supply In That Area, Dewatering, Hydraulic Testing And Restarting The Water Supply ,transportation Of Material Etc. Complete As Directed By Engineer In "trial Run Item No. 1 Commissioning, Running And Maintaining The Scheme To Quantities, Rated Capacity, Including Manning Necessary Personnel Such As Operator, Valveman, Etc. As Per Requirements Of The Scheme And Who Should Also Administer Chemical Dose For A Period Of 1 Month For Individual Scheme And For Regional Scheme, Together With Training Of Personnel Spared By Mjp / Local Body And Handing Over The Scheme To Local Body After Completion Of The Above Period As Directed By Engineer-in-charge.note: Required Chemicals To Be Supplied By Department Free Of Cost And Electricity Bill Will Also Be Paid By The Department.for Singlvillage" Piped Water Supply Scheme At - Adnale Tal- Tala
Zone-A7-Bridge-North: Zonal Piece Work Contract - Execution Of Civil Engineering Works And Supply Of Materials Including Reinforcement Steel All Bridge Works In Sr.Den/ North/Tpj Jurisdiction In Tiruchchirappalli Division For A Period Of Two Years. 2025-26 And 2026-27
Zone-B2a: Goc-Outside Workshop-Zonal Piece Work Contract - Execution Of Civil Engineering Works And Supply Of Materials Including Reinforcement Steel In Works/ A & B / Ponmalai Sections Goc Colony, Roads, School Buildings, Gsd/Goc, Railway Hospital And Watering Arrangements At Sircarpalayam In Tiruchchirappalli Division For A Period Of Two Years. 2025-26 And 2026-27
