"नये भारत का नया Tender Portal"
Labour Charges For Installation Of 7.5hp Motor Including Fitting & Fixing Of Base Frame, Fitting & Fixing Suction And Delivery Pipe To Motor, Nr Valve, Foot Valve, Sluice Valve And Other Fitting Materials Including Cutting, Welding And Construction Of Supporting Pillar Etc. Complete As Per The Direction Of The Engineer-incharge. 100 Mm ø Nominal Bore G.i. Pipe Having Wall Thickness 4.5 Mm Electrical Resistance Welded Of Medium Class Confirming To Is - 1239 (pt-1 Of 2004) With Socketed At One End And The Other End Protected With Plastic Thread Protector. The Socket Confirming To Is-1239 (pt-ii/1992) With Latest Amendmewnts In Random Length Of 4 To 7 Mtrs. Each Pipe Should Bear Isi Certification & Manufacturers Name / Trade Mark. 100 Mm Dia G.i. Bend Is No.1239(part-ii/1992) 100 Mm Dia G.i. Flange Is No.6392 / 1971 100mm Dia Gi Socket Is 1239 (part-ii/1992 ) 160 Mm X 160 Mm X 160 Mm ø Pvc Equal Tee (w.p. 4 Kgf/cm2) Confirming To Is-4995/1988 With Latest Ammendment 5/8 X3" Nut Bolt & Foundation Nut Bolt As Per Is Specification 1/8" Thick Rubber Insertion As Per Is Specification Cost Of 160mm×110mm Dia Pvc Reducing Socket. Cost Of Empty Outdoor Irrigation Panel Board (size 0.45mx0.25mx1.20m) Of 18 Swg (cold Rolled) M.s. Sheet With One Coat Of Red Oxid Primer And Two Coats Of Smoke Gray / Navey Blue Enemel Paint On Both Side ( Inside & Outside) Suitable To Mount 3 Phase Starter, Main Switch And Capacitor Inside The Pannel Board Vertically Over 18 Swg M.s. Sheet. The Pannel Board Should Be Provided With Locking Arrangement And Have Grover On Rear Side For Fixing Motor Hood. The Danger Board Should Be Fixed On The To Of The Pannel Door. Consturction Of 3 Phase L.t.line As Per Rec Standard Confirming To Re Rule 1956 With 200kg Bm Long Psc Pole Support In 0.40m Span With 3x35mm² +1x25 Mm ² Lt X Lpe Ab Cable With Coil Earthing Device, Lt Dead End Clam, Suspension Clamp With I Hook , Stay Accessories Such As Wire Insulator , Clamp Etc. Nut Bolts, Alonwith Concreting Of Poles And Stay As Per Direction Of Engineer In Charge. Electrical Installation With Electrical Materials Such As Pvc Tape, Ampere Tape, 7/20 Pvc Copper Wire, 3/20 Pvc Copper Wire, G.i. Flexible Conduite Pipe, No.6 G.i. Wire, Copper Cable Socket, G.i. Socket And Flange And Petty Materials Required For Electrical Installation Including Fixing Of Td Cable Inside The Earth Trench As Per Direction Of Engineer-in-charge.. Electrical Earthing With Digging Earth Pit Of Size (2 Ft X 2 Ft X 3 Ft ) And Using 1/2 '' G.i Pipe ,no -6 G.i Wire ,cable Socket ,flange , Carcoal, Salt Etc. As Per The Direction Of The Engineer-incharge. Labour For Drilling A Perfectly Vertical Bore Hole Of Specified Dia For A Specified Depth Below Ground Level In Alluvial Soil Strata By Mud Rotary Rig Drilling As Required To Suit The Site Condition As Per The Direction Of Engineer In Charge Including Use Of Own Rigs With Its Accessories, Tools And Plants And All Consumables (like Coir Rope, Cotton Waste And Bentonite Powder Etc. Complete) Etc. For Lowering Of Finished Bore Suitable For Lowering (minimum 400 Mm Dia.) Of 200mm Dia Gi/pvc Pipe For Housing Fitted With Sockets And With Or Without Well Screen As Per The Necessity For The Soft Medium, Hard And Boulder Formations (. Gi/pvc Casing Pipes If Required By The Contractor To Prevent Collapse Of Over Burden Portion ) Including Lower And Withdrawing Of Casing Pipes After Drilling 200mm To 450mm Dia In Over Burden Portion. For Drilling Of 200 (8”) Dia Pipe. From 0 Mtr. To 100th Meters Supply Of All Labour & T&p For Lowering The Following Sizes Of Pvc Pipes With Or Without Slotted Pipes As Per The Necessity From Ground Level & Fitted & Fixed Up In Perfectly Verticaly Position Inlcuding Cutting & Threading Pipe And Slotted Pipe And Fixing All Jointing Materials Etc. Complete. And Keeping The Top Of The Casing Pipe Threaded Including Plugging Tube Wells To Prevent Entry Of Foreign Materials From Above Excluding Cost Of Fitting & Joining Materials. 200mm Dia Pvc/gi Casing Pipes Cleaning And Developing The Production Well Using Their Own Compressor Continuously Worked Till Clear And Adequate Discharge Is Obtained From The Tube Well Including Supply And Use Of All Necessary Equipments And Labour As Per The Direction Of Engineer-in-charge. Supplying All Materials,labour T & P For Packing The Bore With Washed Gravel Size (p-6) Arround The Well Screen And Pipes In Good Quality Including Cost Of Gravel ,conveyance,royality,etc Complete As Per Direction Engineer-in-charge. (100m Depth) =0.786 X (0.4² - 0.2²) X 100mtr = 9.43 Say 9.5 Cum Supplying All Labour Tools ,plant And Grouting With Cement Bentonite Slurry For Saline Sealing In The Bore Arround 200mm Dia Pvc Casing Pipe Etc All Complete As Per Direction Of Engg In Charge(including Cost Of Cement And Bentonite) Labour Charges For Cutting Transverse Slot On 200 Mm Dia Pvc Pipe With Slot Size 1.5 Mm As Per Specification Threading Charges 8" Pvc Bail Plug 8" Pvc Threaded End Cap Pn-10 200mm X 12" Long Pvc Shot Piece 200mm ø Schedule 80 Casing Pipe (as Per Epm Rate Order No.2877 Dated 05.07.2025) Water Sample Test If Required
Gem Bids For Clamps, Clamp Type Connector For Cb Pad To Single Aac Bullhorizontal Take Off, Rigid Type Connector For Ct Pad To 3inch Ips Al Tube, Rigid Type Connector For Pt Pad To 3 Ips Altube Tee Type, Clamp Type Connector For La Pad To Singleaac Bull, Rigid Type Connector For La Pad To 3 Inch Ips Altube, Rigid Sliding Type Bus Support Clamp For 3 Inch Ips Altube, Through Type Bus Post Insulator Support Clamp Forsingle Aac Bull, Tee Connector For 3 Inch Ips Al Tube Tosingle Aac Bull, Tee Connector For 3 Inch Ips Al Tube To 3inch Ips Al Tube, M12 Bolt Nut Washer, M16 Bolt, Connector For 38 53 63 Mva Tf To Acsr Single Zebrahorizontal, Connector For 38 53 63 Mva Tf Receive 3 Inchips Flexible 206f, Connector For 38 53 63 Mva Tf To 12 Kvn Bushing To 75x8 Mm Flat 206 R
Gem Bids For Ex Work Supply For Composite Core Htls Conductor , Ex Work Supply For Suspension Clamp For Suspension Insulator String , Ex Work Supply For Suspension Clamp For Suspension Pilot Insulator String , Ex Work Supply For Dead End Clamp For Tension Insulator String , Ex Work Supply For Mid Span Compression Joint , Ex Work Supply For Repair Sleeve , Ex Work Supply For Vibration Damper , Ex Work Supply For T-connector , Ex Work Supply For Composite Core Type Htls Conductor , Ex Work Supply For Suspension Clamp Forsuspension Insulator String , Frieght And Insurance For 500 Km For Composite Core Type Htls Conductor , Frieght And Insurance For 500 Km For Suspension Clamp Forsuspension Insulator String , Frieght And Insurance For 500 Km For Suspension Clamp For Suspension Pilot Insulator String , Frieght And Insurance For 500 Km For Dead End Clamp For Tension Insulator String , Frieght And Insurance For 500 Km For Mid Span Compression Joint , Frieght And Insurance For 500 Km For Repair Sleeve , Frieght And Insurance For 500 Km For Vibration Damper , Frieght And Insurance For 500 Km For T-connector , Frieght And Insurance For 500 Km For Suspension Clamp For Suspension Insulator String
Gem bids for Composite, Bid Number Gem2025b6522805 Dated 01-08-2025 Bid Document1 26 1 1 Ex Works Supply Of Composite Core Type Htlsconductor, Ex Works Supply Of Suspension Clamp Freecentre Type, Ex Works Supply Of Suspension Clamp Forsuspension Pilot Insulator String, Ex Works Supply Ofdead End Clamp For Tension Insulator String, Exworks Supply Of Mid Span Compression Joint, Ex Workssupply Of Repair Sleeve, Ex Works Supply Of Twinspacer Damper, Ex Works Supply Of Twin Rigid Spacer S, Ex Works Supply Of T-Connector, Ex Works Supply Ofspare Composite Core Type Htls Conductor, Exworks Supply Of Spare Suspension Clamp Free Centretype, Ex Works Supply Of Spare Suspension Clamp Forsuspension Pilot Insulator, Ex Works Supply Of Sparedead End Clamp For Tension Insulator, Ex Workssupply Of Spare Mid Span Compression Joint, Ex Workssupply Of Spare Repair Sleeve, Ex Works Supply Of Sparetwin Spacer Damper, Ex Works Supply Of Spare Twinrigid Spacer, Freight And Ins For Composite Core Typehtls Conductor, Freight And Ins For Suspension Clampfree Centre Type, Freight And Ins For Suspension Clampfor Suspension Pilot Insulator String, Freight Andins For Dead End Clamp For Tension Insulator String, Freight And Ins For Mid Span Compression Joint, Freightand Ins For Repair Sleeve, Freight And Ins For Twinspacer Damper, Freight And Ins For Twin Rigid Spacer S, Freight And Ins For T-Connector, Freight And Ins Forspare Composite Core Type Htls Conductor, Freightand Ins For Spare Suspension Clamp Free Centre Type, Freight And Ins For Spare Suspension Clamp Forsuspension Pilot Insulator, Freight And Ins For Sparedead End Clamp For Tension Insulator, Freight Andins For Spare Mid Span Compression Joint, Freight Andins For Spare Repair Sleeve, Freight And Ins For Sparetwin Spacer Damper, Freight And Ins For Spare Twinrigid Spacer
Gem Bids For Price, Ex Work Supply For Composite Core Htls Conductor, Ex Work Supply For Suspension Clamp For Suspensioninsulator String, Ex Work Supply For Suspensionclamp For Suspension Pilot Insulator String, Exwork Supply For Dead End Clamp For Tension Insulatorstring, Ex Work Supply For Mid Span Compression Joint, Ex Work Supply For Repair Sleeve, Ex Work Supply Forvibration Damper, Ex Work Supply For T-connector, Exwork Supply For Composite Core Type Htls Conductor, Ex Work Supply For Suspension Clamp Forsuspensioninsulator String, Frieght And Insurance For 500 Km Forcomposite Core Type Htls Conductor, Frieght Andinsurance For 500 Km For Suspension Clampforsuspension Insulator String, Frieght Andinsurance For 500 Km For Suspension Clamp Forsuspension Pilot Insulator String, Frieght Andinsurance For 500 Km For Dead End Clamp For Tensioninsulator String, Frieght And Insurance For 500 Km Formid Span Compression Joint, Frieght And Insurance For500 Km For Repair Sleeve, Frieght And Insurance For 500km For Vibration Damper, Frieght And Insurance For 500km For T-connector, Frieght And Insurance For 500 Km Forsuspension Clamp For Suspension Insulator String
Gem bids for Dismantling, 150X150mm Rs Joist 11 Mtr Long 30.6Kg Per Meter Each336.6 Kg, 11Kv V Cross Arm, 11Kv F Clamp, Back Clampfor V Cross Arm, 11Kv Pin Insulator Polymer, 6 Hw Fittingterm And Condition 45Kn, Disc Insulator Term And Cinditionc 45 Kn Polymer, Ht Stay Set Complete, Ht Stay Insulator, Ht Stay Clamp 1.95Kg Per Pair, 7 Or 10 Swg Stay Wire 10Kgper Stay, 11Kv Icore, 100Sqmm Xlpe Insulated Aaaconductor Unarmoured, 100X50x6 Mm G 1 Channel Each2.8 Mtr. Long 9.2Kg Per Mtrx 2 No., 75X40x6 Mm Gichannel Each 2.8 Mtr. Long 6.8Kg Per Mtrwith Side Angle, 50X50x6 Mm Gi Angle Each 2.8 Mtr. Long 4.5Kg Per Mtrwith Side Angle, Pg Clamp For 100 Mm2 Aaa Conductor, Ginuts And Bolts Of Assorted Size, Earthing Support Coil Type, Danger Plate, Anti Climbing Device Made Of Gi Barbed Wire, Clamping Arrangement Etc. 2Kg Per Support, Sundriessurvey, Tree Cutting, Insulation Tape, Small Size Nut Bolt, Clamp, Binding Wire, Sockets, Concreting Work Of 11 Mtr Gipole, Material Cost For Concreting Of Stay Wire, Dismantlingof Rs Joint Of 11 Mtr Long, Dismantling Of Pole Of 8 Mtr Longpsc Pole, Dismantling Of Aaac Conductor
Gem Bids For Clamps, Clamp Type Connector For Cb Pad To Single Aac Bull Horizontal Take Off, Rigid Type Connector For Ct Pad To 3inch Ips Al Tube, Rigid Type Connector For Pt Pad To 3 Ips Altube Tee Type, Clamp Type Connector For La Pad To Single Aac Bull, Rigid Type Connector For La Pad To 3 Inch Ips Altube, Rigid Sliding Type Bus Support Clamp For 3 Inch Ips Altube, Through Type Bus Post Insulator Support Clamp For Single Aac Bull, Tee Connector For 3 Inch Ips Al Tube Tosingle Aac Bull, Tee Connector For 3 Inch Ips Al Tube To 3inch Ips Al Tube, M12 Bolt Nut Washer, M16 Bolt, Connector For 38 53 63 Mva Tf To Acsr Single Zebra Horizontal, Connector For 38 53 63 Mva Tf Receive 3 Inch Ips Flexible 206f, Connector For 38 53 63 Mva Tf To 12 Kvn Bushing To 75x8 Mm Flat 206 R
Supply Of Non Ferrous Casting Al Cap Pf Cover Oil Gauge Clamp Insulator Al Clamp Non-ferrous Casting Insul./oil Gauge Clamp, Al.cap, Power Factor Etc
The Work Of Reconstruction Of 11/33 Kv/lt Lines Fallen Due To Heavy Storm, Straightening Of Tilted Pole, Replacment Of Damaged X Arm, Pin Insulator, Disc Insulator, Clamp, Transformer Etc. & Re-sagging Of Existing Loose Conductor, Tightening Of Stay & Fixing Of Earthing Rod In Deviya Apda And Other Associated Works Under Edd-fatehabad.
Gem Bids For Hanger Clamp With Insulator, Parts Of Crans, Expansion Joint For 800 Amp. Powet Rail , Collector, Part Of Crane, Anchor Clamp, Insulation Piece For Shoe Holder, Copper Strip For Holding Collector Shoe, Rail Connector, Conductor Rail, Power Feed, Connector, Slidung Contact, Current Collector, End Cap, Expansion Unit, Hanger Clamp
