"नये भारत का नया Tender Portal"
Retender-Supply Of Ms Erw Tube Chassis For Electric Auto
Gem Bids For College, Steel Almirah, Steel Almirah Small, Fully Plasticmoulded Chair With Arms Seat Andback Cushioned, Executive Table Or Office Table, Library Almirahsteel Glass Front Cabinet, Laboratoryorlibraryorcanteen Table, Drawing Stool, Computertable, Computer And Printer Table, Steel Rack, Conference Room Table, Chemistry Lab Table, Footrest, Laboratory Table With Boxes, Lecture Stand, Laboratory Table With Drawers, Notice Board, Single Seat Sofa, Three Seat Sofa, Revolving Chairbig, Revolving Chair Smallsteel Almirah : Size:- Height-1981mm, Width-916 Mm, Depth - 486mm Construction: - The Almirah Should Havewelded Type Construction. The Thickness Of Back Panelshould Be 0.8 Mm, Other Components The Thickness Shouldbe 0.9mm And The Shelf Thickness Should Be 1.2 Mm Doors& Handles: - The Almirah Should Have Full Height Steelhinged Door & Should Be Provided With Handle. Locking: -the Almirah Should Be Provided With 3 Way Lockingmechanism & Shooting Bolt Arrangement. Shelves & Loadbearing Capacity: - The Almirah Should Have Height Wiseadjustable Shelf Mounting And Uniformly Distributed Loadcapacity Per Each Full Shelf Should Be 80 Kg And Shelvesshould Be 4 In Number And Should Be Fully Adjustable.powder Coating Process: - All The Metal Parts Shall Be Givenantirust Surface Treatment & And Shall Be Powder Coatedwith Epoxy Polyester Powder. It Shall Involves An 8 Steptreatment. Final Finish Shall Consists Of Poxy Polyesterpowder Coating Of Approved Color & Shade With A Dry Filmthickness Of Minimum 40 Microns. The Testing Of Paint Shallbe Done For Various Physical & Chemical Properties As Peris: 101. The Material Shall Then Be Oven Baked With A /bid Number: Gem/2025/b/6561795* /dated: 25-08-2025 & & / Bid Document1 / 35 Controlled Temperature Of 1800c To 2000c. Manufacturer/supplier Must Have Iso- 9001, 14001, Bifma & Ohsascertifications. Certificates Should Be Attached. Leveler:-itshould Have Leveler With M10 Screw Type Leveler Withhexagonal Plastic Base. , Steel Almirah Small : Size:-height 1270 Mm, Width 765mm, Depth 440 Mmconstruction: - The Almirah Should Have Welded Typeconstruction. The Thickness Of Back Panel Should Be 0.8mm, Other Components The Thickness Should Be 0.9mm Andthe Shelf Thickness Should Be 1.2 Mm Doors & Handles: -the Almirah Should Be Provided With Full Height Steelhinged Door & Should Have Handle. Locking: The Almirahshould Have 3 Way Locking Mechanism With Shooting Boltarrangement. Shelves & Load Bearing Capacity: - Thealmirah Should Have Height Wise Adjustable Shelf Mountingand Uniformly Distributed Load Capacity Per Each Full Shelfshould Be 80 Kg Maximum And Shelves Should Be 3 Innumber And Should Be Fully Adjustable Shelves. Powdercoating Process: - All The Metal Parts Shall Be Given Antirustsurface Treatment & And Shall Be Powder Coated With Epoxypolyester Powder. It Shall Involves An 8 Step Treatment. Finalfinish Shall Consists Of Poxy Polyester Powder Coating Ofapproved Color & Shade With A Dry Film Thickness Ofminimum 40 Microns. The Testing Of Paint Shall Be Done Forvarious Physical & Chemical Properties As Per Is: 101. Thematerial Shall Then Be Oven Baked With A Controlledtemperature Of 1800c To 2000c. Manufacturer / Suppliermust Have Iso- 9001, 14001, Bifma & Ohsas Certifications.certificates Should Be Attached Leveler:- It Should Haveleveler With M10 Screw Type Leveler With Hex Plastic Base , Fully Plastic Moulded Chair With Arms Seat &backcushioned : Size - Total Height : 820mm + 10mm, Totalwidth : 565mm + 10mm, Total Depth : 565mm + 10mm&total Weight: 4.20 Kg + 50gms Cushioned Chair With Armscomprising Of Single Piece Moulded Frame Made Ofpolypropylene & Coated With Pu Coating Paint High Glossfinish With Seat & Back Cushion Made Of Moulded Pu Foamand Velvet Upholstery. Weight Of Moulded Polypropleneframe Is 4.2 Kg. , Executive Table/office Table : Thesize Of The Table In Mm Should Be 1500 X 600 X 728 Andshould Consist Of Following Parts: Top: Top Should Furtherconsist Of Work Surface Which Should Be 18mm Thick And Prelaminated Particle Board Plb. All Work Surface Edgesshould Be Duly Sealed With 2mm Thick Machine Fitted Pvcedge Banding Understructure: Understructure Shouldconsist Of The Following Components: A.rectangular Frame:rectangular Frame Should Be A Fabricated Component In1.2mm Thick Crca Is:513 With Powder Coat Epoxypolyester B.legs: Legs Should Be Fabricated Component In38mmx25mmx1.2mm Thick Ms Erw Tube Is:7138 Withpowder Coat Epoxy Polyester C. Plastic Cap For Cable:plastic Cap For Cable Should Be Made Up Of Injectionmoulded Polypropylene. D. Leveler Glide For Leg : Levelershould Be Made Of Nylon 6 & Consist Of Ms Bolt. Storage:storage Should Consist Of Pedestal. The Pedestal Shouldfurther Consist Of A. Shell Which Should Be 0.6mm Thickcrca Is:513 And Should Have Powder Coat Epoxypolyester As Finish. B. Drawer Tray Which Should Be 0.6mmthick Crca Is:513and Should Have Powder Coat Epoxypolyester As Finish C. Drawer Front Which Should Be 0.8mmthick Crca Is:513 And Should Have Powder Coat Epoxypolyester As Finish D. Frame Assembly Which Should Be1.2mm Thick Rca Is:513 And Should Have Powder Coatepoxy Polyester As Finish. E Lock Which Should Be 10 //bid Details2 / 35 Lever Cam Lock F. Handle Which Should Be Made Ofinjection Moulded Polypropylene G. Leveler Which Should Bemade Up Of Nylon 6 And Should Also Consist Of Ms Boltpowder Coating Process: All The Metal Parts Shall Be Givenantirust Surface Treatment And Shall Be Powder Coated Withepoxy Polyester Powder. It Shall Involves An 8 Steptreatment. Final Finish Shall Consists Of Poxy Polyesterpowder Coating Of Approved Color & Shade With A Dry Filmthickness Of Minimum 40 Microns. The Testing Of Paint Shallbe Done For Various Physical & Chemical Properties As Peris: 101. The Material Shall Then Be Oven Baked With Acontrolled Temperature Of 1800c To 2000c. Manufacturer /supplier Must Have Iso- 9001, 14001, Bifma & Ohsascertifications. , Library Almirah Steel Glass Frontcabinet : The Size Of The Almirah Should Be Of 915 Mm Wx 486mm D X 1981 Mm H Construction & Material: - Itshould Have Welded Construction Using 0.8 Mm Thick Crcavirgin Steel For Shelf & 0.9 Mm Thick Crca For All Othercomponents. Door Glasses Thickness 5mm Should Be Fittedto Full Height Steel Frame. Minimum 6 Lever Locking 2 Waylocking Mechanism With Shooting Bolt Should Be Provided.standard Size Handle To Be Provided Should Be Chromeplated Brass Handle Shelving: Height Wise Adjustableshelves 4 Nos Should Be Provided. Uniformly Distributedload Capacity Per Full Shelf Should Be 80 Kg Maximumleveler Should Be Provided Which Consist Of M10 Screw Typewith Hexagonal Plastic Base. Add 10mm To Unit Height Andadditional 10mm For Adjustment. Powder Coating Process:all The Metal Parts Shall Be Given Antirust Surface Treatment& And Shall Be Powder Coated With Epoxy Polyester Powder.it Shall Involves An 8 Step Treatment. Final Finish Shallconsists Of Poxy Polyester Powder Coating Of Approved Color& Shade With A Dry Film Thickness Of Minimum 40 Microns.the Testing Of Paint Shall Be Done For Various Physical &chemical Properties As Per Is: 101. The Material Shall Thenbe Oven Baked With A Controlled Temperature Of 1800c To2000c. Manufacturer Quality & Safety Assurancecertificationmanufacturer / Supplier Must Have Iso- 9001, 14001, Bifma & Ohsas Certifications. , Laboratory/library/canteen Table : Overall Size: 1800 Mm W X900mm D X 740mmh +- 10mm Tolerance On Overallsizes. Frame:legs Of Table Frame Should Be Made Of Erwround Pipe Of 48mm+- 1.0mm And 1.5mm Thickminsupports Shall Not Be More Than 160mm From The Floor Levelwhen Measured Frombottom Of Pipe Two Supports Of Thesame Pipe Should Be Provided Breadth Wise In Betweenthelegs Of The Frame And Two Supports Should Also Beprovided Length Wise Between Legs Supports Are Welded Toeach Other Properly. The Frame Top Should Be Made Of Msangle Iron Size38mmx38mmx5mmmin.. The Bottom Of Legsshould Be Closed With Metal Shoes. Top:top Should Be Madeout Of 18mm +-1.0mm Commercial Board Fixed With Goodquality Sunmica 0.75mm Thick. Shade Of Sunmica Top Shouldbe Natural Teak/ Baverian Beach. All The Edges Of Thesunmica Top Should Be Fixed With Teak Beading Duly Spiritpolished. Finish All Steel Components Are To Be Prepared Fordegreasing And Derusting. After Pretreatment, The Steel Steelcomponents Are To Be Epoxy Powdercoated. Thickness Ofpowder Coatingshould Be 50-60 Micron Min. Shade Ofpowder Coating Should Be Nickle Grey/ Seimn Grey. , Drawing Stool : Seat Assembly: It Is Circular Type 30.0 0.5cm And Made Up Of 0.1 0.012 Cm Thickness Crsteel. It Is Welded To The Understructure And Coated Withblack Epoxy Polyester Powder Dft 50-80 Microns.
Supply of Gas Chromatography Mass Spectrometry (GC - MS), Gas Chromatography - Triple Quadrupole Mass Spectrometry (GC - MS - MS), Glass Ionomer Cement for Dentistry, MS Sheet as per IS 1079, trolleys or accessories, M S Casing For Pulverised Fuel Mill (BHEL), Cyanide Distillation Apparatus, MS Structural Plate as per IS 2062 (Unit - Quantity), Sofa Set (Steel Tube), MS ERW Pipe for Bus Body Building Parts as per IS 3601 (Latest)
Supply Of Gas Chromatography - Triple Quadrupole Mass Spectrometry Gc - Ms - Ms, Gas Chromatography Mass Spectrometry Gc - Ms, Wild - Life Cages, Ms Sheet As Per Is 1079, Trolleys Or Accessories, M S Casing For Pulverised Fuel Mill Bhel, Ms Structural Plate As Per Is 2062 Unit - Quantity, Sofa Set Steel Tube, Ms Erw Pipe For Bus Body Building Parts As Per Is 3601 Latest, Towel Rail / Ring For Bathroom
Supply of L-Shaped Counter Table Supply To Over Telangana, Maharastra, Karnataka States With Th E Following Specifications. Main Worktop: Made Of 25Mm Thick Pre-Laminated Boardplb Of E1-P@ Gr Ade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2Mm Thick Pvc Li Pping. Access Flap Provided On Work Surface For Wire Management. Return Worktop: Made Of 25Mm Thick Pre-Laminated Boardplb Of E1-P2 Grade And Approved Shade Confirming To Is-12823-1990, Ed Ge Banded With Matching 2Mm Thick Pvc Lipping. Modesty Pane:Made Of 18Mm Thick Pre-Laminated Boardplb Of E1-P2 Grade And Approved Shade Confirming To Is-12823-1990, Edge Banded With Mat Ching 2Mm Thick Pvc Lipping. Legs: Cube Legs Are Fabricated From Ms Erw Tube Of 50Mm X 25Mm X 1.2 Mm Thick And 40Mm X 40Mm X 1.2Mm Thick As Peri S:7138. At The Top Surface Of Legs, Support Brackets Of 3Mm Thick Hr As Per Is:2062 Are Welded For Fixing Work Shop. These Are Welded Toget Her By Argo Shiled Welding. This Welded Structure Is Coated With 50Micron Epoxy Polyster Coating. At The Base, A Plastic Cap With M8 Molded Insert Is Fixed, On To Which A Straight M8 Leveler Fitted Which Allows For Adjustment Of The Height Upto 50Mm. Cross Members; Cross Members In Unitized T-2 Desk Series Are Made From 50Mm X 25Mm X 1.2Mm Thick Erw Tube As Per Is:7138 These Are Coated Wit H 50Microns Epoxy Polyster Coating. Cross Members Are Assembled By Friction Fit Pdc Joinery Abd Gr Ubscrews. There Are Always Two Cross Members For One Table. Access Flap:Soft Closing Access Flap Is Used In Unitized T-2 Desk Series. Provision For Standard Size Of 8 Module Electrical Anchor Roma Is O Ffered.Access Flap Is Made From Alumunium Extension, Pdc Parts Made From Aluminium Alloy And Pl Astic Parts Are Made From Nylon 6 And Wire Brush With Nylon Bristles. Power Box: Power Box Made Wi Th 0.8Mm Thick Crca Is:513, With Switch Plate 8 Module Cutout Provision For Anchor Roma. This Is Fixed With Workshop Along The Depth Of Access Flap Position. Integrated Hinge Door Storage With Dra Wer: Made Of 18Mm Thick Pre-Laminated Twin Board Of E-1 To P2 Grade And Approved Shade Confirmin G To Is-12823:1990, Edge Banded With Matching 2Mm Thick Pvc Lipping. Door Is Fixed With Slide On Hi Nges And Handles Is Providedfor Ease Of Mpening Drawer Is Provided With Ebcometa Box Slide And Lo Ck For Security. Certification: Green Guard, Green Pro, Indoor Air Quality, Griha Certified. Make Prefe Rable: Godrej/Wipro/Damaro Warranty Period: 30 Months After The Date Of Delivery
Supplying And Placing In Position Main Desk Of The Following Specifications. The Main Desk Shall Be Of Size 1800 Width Mm X 900 Depth Mm X 750 Height Mm.The Table Top Shall Be 25 Mm Thick Mfc Melamine Faced Chipboard Also There Should Be 30 Mm Mdf Medium Density Fiberboard Black Pad.The Modesty Panel Shall Be Of 18 Mm Thick Mfc Melamine Faced Chipboard.The Leg Of The Main Desk Shall Be Of 25 Mm Mfc Plus 30 Mm Mdf Right And Left Pad.The Main Table Should Be Of Duck Noise Profile Edge In Order To Enhance The Workspace Aesthetics. The Joining Table Shall Be Of Size 1050 Width Mm X 1200 Depth Mm X 750 Height Mm.The Top Panel Shall Be 25 Mm Thick With Mfc Melamine Faced Chipboard.The Leg Of The Joining Table Shall Be Of Metal.Polyurethane Coated Joining Table. The Mobile Pedestal Size Shall Be 400 Width Mm X 560 Depth Mm X 560 Height Mm. The Return Desk Size Shall Be 1200 Width Mm X 600 Depth Mm X 730 Height Mm. The Product Should Be Certified With The Following :Greenguard, Griha & Sva Griha And Green Pro, Providing And Placing High Back Chair With Overall Size Of 76.1 Cm W X 76.1 Cm D X 112.7 – 130.2 Cm H X 43.1 – 53.1 Cm Seat Height. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Armrest Top Is Molded From Polyurethane And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of Ø3.81±0.03Cm X 0.2±0.01Cm Thick M.S. Erw Tube Having Chrome Plated Finish. The Armrest Is Height Adjustable Up To 6.5±0.5 Cm In 5 Steps. The Adjustable Tilting Mechanism Is Designed With Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair, Seat/Back Tilt Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is Of 6.0±0.5Cm. Back Frame Is Connected To The Up/Down Mechanism In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Comfort The Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3Cm. The Pedestal Is High Pressure Die Cast Polished Aluminium & Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Is 65.0±0.5Cm Pitch Centre Dia. 75.0±1.0Cm With Castors. 5 Nos. Of Twin Wheel Castors Are Injection Molded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. The Product Should Be Certified With The Following : Cii Green Pro, Ul Greenguard, Griha, Scs Indoor Advantage Gold, Bifma Level 2, Providing And Placing Visitors Chair With Overall Size Of 60.9 W M X 64.2 D Cm X 98.2 H Cm X 44.8 Seat Height Cm. The Seat Is Cushioned Seat Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Molded High Resilience Polyurethane Foam Of Density 45±2 Kg/M³, & Hardness Load Of 16±2 Kgf As Per Is:7888 For 25% Compression. Seat Size Is 47.0 W Cm X 48.0 D Cm. The Back Is Cushioned Made Of Pu Foam With Insitu Molded M.S. Erw Round Tube Of Size 1.9±0.03Cm X 0.16±0.0128Cm, Upholstered With Leatherette. The Back Size Is 47.7 W Cm X 76.4 D Cm. The Tubular Frame Is Cantilever Type And Made Of Ø2.54±0.03Cm X 0.2±0.016 Cm Thick Ss 202 Tube. The Back Connected To Frame Through Chrome Plated High Pressure Die Casted Connector Pipe. The Product Should Be Certified With The Following : Cii Green Pro, Ul Greenguard, Griha, Scs Indoor Advantage Gold, Bifma Level 2, Providing And Placing Coffee Table. Specifications Are As Follows Width 100 Cm Depth 65 Cm And Height 45 Cm. Top Is Made Of Glass And Legs Are Made Of Wood. The Bottom Top Of Table Is Consist Of Mdf Board And In Center With Glass, Supplying And Placing 3 Seater Sofa. The Overall Dimensions Of The Sofa Shall Be 1830W X 800D X 840H. The Seat Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu.Mtr Having An Additional Top Layer Of Supersoft Pu Foam With Density 32 ± 2 Kg/Cu. Seat Should Be Upholstered With Leatherette. 2 Back Foam: The Back Should Be Made Of Pu Foam With Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructure Should Be Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood Which Also Shall Be Resistance And Termite Proof As Per Is:303. And Pinewood Of Cross Section Deviod Of Major Knots And Surface Defects 6 Nos. Per Seat And 3.8Mm Dia. Zigzag Spring Assembly Is Mounted Over Understrucrure For Cushioning Effect. It Should Be A Wooden Makeover Legs. The Product Should Be Certified With The Following :Greenguard, Griha & Sva Griha And Green Pro, The Overall Dimensions Of The Chair Shall Be 60.9Cm X 64.3Cm X 99.6Cm. The Seat Height Shall Be 44.8Cm. The Cushioned Seat And Back Is Made Of Injection Moulded Plastic Outer And Inner. Plaster Inner Is Upholstered With Stitched Cover And Moulded High Resilience Polyurethane Foam Of Density 45Kg Per Meter Cube. The Stitched Cover Is Made From Spacer Fabric And Leatherette. Seat Size Shall Be 47Cm X 48Cm. The Back Size Shall Be 45Cm X 60.5Cm. The Armrests Top Is Moulded From Pu And Mounted On To A Drop Lift Adjustment Type Tubular Armrest Support Made Of 3.8Cm Diameter X 0.2Cm Thick Ms Erw Tube. The Tubular Frame Shall Be Powder Coated Dft 40-60 Microns And Is Cantilever Type And Made Of 2.54Cm X 0.2Cm Thick Ms Erw Tube. The Back Is Connect To Frame Through Powder Coated High Pressure Die Cast Connector Piece. The Product Should Be Certified With The Following : Cii Green Pro, Ul Greenguard, Scs Indoor Advantage Gold, Bifma Level 2, Etc
Supply of Executive Chair,(1). SEAT ASSEMBLY: The seat is made up of 1.4 ± 0.1 cm thick hot - pressed plywood upholstered with fabric and moulded polyurethane foam. It has a seat depth adjustment of 5.0 ±0.3 cm integrated in the seat through a sliding mechanism.SEA, Executive Table Work Surface:Made of combination of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top and 25mm Thick Prelaminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel:Made of 25mm thick MDF one side prelaminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under- structure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security., Storage Unit Product Size:(448(W)/598(W) x 18(T) x 1510(H) Glass Door). (448(W)/598(W) x 18(T) x 761 (H) Metal Door) (Combi Lock) Bid Number/???? (???? (?? ??)??) : GEM/2024/B/5522592 Dated/*????? : 21-10-2024 Bid Document/ ?? ?1????? 1 / 14 GeMARPTS ?3 ???? ?? 617?? / Searched Strings used in GeMARPTS Single side Door for 450W and 600W 2 side Doors (LH and RH) for 900W and 1200W For 450W and 900W storage-Each Door width 448W For 600W and 1200W storage-Each Door width 598W Construction & Material:Glass Door is made from the combination of aluminium alloy (63400) extrusion and clear glass.. Metal Door is made from 0.6mm thick CRCA (D Grade, IS-513).Soft closing Hinge. Handle:Asthetically appealing handle made of Aluminium Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron), Visitor Chair 1.SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should be designed with contoured lumber support for comfortable seating posture. MID BACK SIZE 48.0cm.(W) X 64.5cm.(H) SEAT SIZE 51.0cm.(W) X 48.0cm.(D) 2.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should be moulded with density = 45±2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression. 3.ARMRESTS:The armrest top should be made of moulded polyurethane (P.U) and mounted on to a fixed type M.S. tubular armrest support which should be chrome plated. The arm support has static vertical adjustment of ±1.5±0.05cm. 4.FIXED BACKREST: The backrest consshould be ts of a fixed type mechanism i.e. no back up/down adjustment. 5.LEG FRAME ASSEMBLY: The leg frame welded assembly should be chrome plated, made from 3.5 ±0.03cm. x 1.5 ±0.02cm. x 0.16 ±0.0128cm. thk Elliptical M.S. ERW tube and provided with a base plate for seat fixing, Computer Table Enterprise 1500 Table with CPU Hanger size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) ., Sofa 2 Seater Understructure : Understructure of seat is made up of combination of pinewood members and 12mm thick Plywood. Pinewood are of Understructure·cross sections 22x64mm,34x64mm and 16x35mm without having major knots & defects on the surface. Complete understructure of Seat is made by gluing, nailing & stapling. Non-woven fabric of 100GSM is stapled on the top surface after attaching ZigZag spring to cover the structure. Seat support tube made up of Steel is added in the seat structure of 2 Seater,3 Seater and Chaise for additional strength & support. Foam : Seating surface is made by using pocket spring of wire dia 2mm which is surrounded by PU foam of density 28 kg/m3. Bid Details/?? ???? 2 / 14 A top layer of supersoft PU foam with density 32 kg/m3 is used to provide softness. Upholstery cover : Upholstery cover of seat is made of woven fabric. 2. Backrest : (1 Seater, 2 Seater, 3 Seater,Chaise,Corner,Wing chair) Understructure: Understructure is made up of combination of pinewood members, 12mm THK ·Plywood and HDPE sheet. Pinewood are of cross sections 16x35mm, 16x74mm, 25X25mm without having major knots & defects on the surface.Foam: Backrest is made of PU foam with density 60 kg/m3. Upholstery cover : Upholstery cover of backrest is made of woven fabric. 4.Cushion :(1 Seater, 2 Seater, 3 Seater, Chaise,Corner,Wing chair) Cushion is made up of loose recron filled in White non-woven 30 GSM bag. This stitched non-woven bag is kept inside the upholstery cover of cushion pillow. Upholstery cover : Upholstery cover of cushion is made of woven fabric.The cover is in dual tone , bottom half made with Fabric-1(woven finish fabric) & upper half with Fabric2(velvet finish fabric). 5. Upholstery :Complete sofa is uplholstered with woven fabric which has the following colour schemes: 1. CHARCOAL ,2. PURPLE HAZE 6. Legs : Polypropylene leg (with 20% talc for better filled with M8 steel stud in black color. 7. Armrest (Normal Amrest LH & RH & wing Armrest) Understructure : Understructure of armrest is made up of combination of pinewood members, 12mm thick Plywood, 3mm thick MDF. Pinewood are of cross sections 16x79mm without having major knots & defects on the surface. Complete understructure of Armrest is made by gluing, nailing & stapling. Foam : Foaming of Armrest is done with density 28kg/m3 and 60kg/m³. 8. Console Armest : Understructure : Understructure of armrest is made up of 12mm thick ply.PLT panels are used to make shutter flaps for console armrest. Soft closing hinges are provided to these shutter flaps. Complete understructure of Armrest is made by gluing, nailing & stapling.Foam : Foaming of Armrest is done with density 28kg/m
Supply of Tube Ms Black / Tube Ms Erw Black Medium Grade With Ends Threaded With Standard Thread Without Socket And The Ends Fitted With Plastic Caps In Lengths Of 6 Mtrs Plus 50 Mm And -0.00 Mm Nominal Bore 20 Mm
Supply of Wooden Set Of Furnitures. Wooden Dressing Table With Mirror One Stool With Drawer-Overall Size : Dressing Table Depth - 450.0 Mm Width - 440.0 Mm Height - 1710.0 Mm Dressing Stool ?Depth - 335.0 Mm Width - 360.0 Mm Height - 450.0 Mm .Material :Panels Of Dressing Table & Stool Are Made Of 18 Mm Thick Prelaminated Particle Board .All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. Side Panels Are Made Of 18 Mm Thick Prelaminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trims Fixed On To It.Mirror Panel Is Made Of 18 Mm Thick Particle Board With 4 Mm Thick Mirror Fixed On To It..Supporting Pipe Used For Fixing The Mirror Frame Is Made Of M.S. 25 Mm Square Pipe Of Thickness 1.2 Mm. Stool Seat Is Made Of Foam With Fabric Wrapped On To It.Hardware : The High Quality Hardware Used Like Roller Slides, Hinges, Minifix, Dowels Is Of Make Hettich..Construction : Knock Down Construction.Packets : 3 Packets. Finish :. 18 Mm Thick Prelaminated Particle Board Is In Walnut Shade. Metal Pipe Is Powder Coated In Shade Metallic Silver Grey To Thickness Of 50 Microns+-10.Bidder/Oem Must Have Following Certificates: Iso 45001:2018, Iso 9001:2015, Iso 14001:2015, Iso 50001:2011 All Iso Certificate Should Be From Nabcb Authorized Agency, Bifma Membership, Bifma Level 2 & 3 Conforms To Ansi/Bifma E3-2014E Furniture Sustainability Standard, Greenguard From Ul, Green Pro, Griha, Aiota, Igbc, Indoor Air Quality Certificate By Scs Global. Warranty Period: 30 Months After The Date Of Delivery Wooden Centre Table With Glass Top Dimension Mm - 1310Mm Lenghth X 700Mm Depth X 380Mm Height Table Meterials & Size : Top : Tempered Glass, 1252*652*8Mm Color : Super White In Beige Painting Body : Mdf Color : Grey-White High Glossy Type Of Caoting Pu /Melamine/Paper/Paper Plus Pu/Lamination: Pu Legs: Rubber Wood, 700*372*85Mm Color : Walnut Painting Bidder/Oem Must Have Following Certificates: Iso 45001:2018, Iso 9001:2015, Iso 14001:2015, Iso 50001:2011 All Iso Certificate Should Be From Nabcb Authorized Agency, Bifma Membership, Bifma Level 2 & 3 Conforms To Ansi/Bifma E3-2014E Furniture Sustainability Standard, Greenguard From Ul, Green Pro, Griha, Aiota, Igbc, Indoor Air Quality Certificate By Scs Global. Warranty Period: 30 Months After The Date Of Delivery Wooden Single Bed, Overall Size :Length - 2060.0 Mmwidth - 1131.0 Ram Height - 945.0 Mm Material: Bed Structure Consist Of Metal Frames Made Of M.S. Channels In 1.0 Mm Thickness. Horizontal Plinths And Bottom Plinth Are Made Of 25 Mm Thick Prelaminated Particle Board.Head Board Is Made Of 18 Mm Thick Prelaminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trims Fixed To It.Tail Board Is Made Of 18 Mm Thick Prelaminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trims Fixed To It. Side Rail Is Made Of 18 Mm Thick Prelaminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trims Fixed On To It.Mattress Panels Of Bed Are Made Of 18 Mm Thick Prelaminated Particle Board With All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. Construction :Knock Down Construction.Packets :1 Bed In 1 Packets. Finish :18 Mm Thick Prelaminated Particle Board Is In Walnut Shade. Metal Frames Are Powder Coated In Shade Mat Black To The Thickness Of 50 Microns+-10.Bidder/Oem Must Have Following Certificates: Iso 45001:2018, Iso 9001:2015, Iso 14001:2015, Iso 50001:2011 All Iso Certificate Should Be From Nabcb Authorized Agency, Bifma Membership, Bifma Level 2 & 3 Conforms To Ansi/Bifma E3-2014E Furniture Sustainability Standard, Greenguard From Ul, Green Pro, Griha, Aiota, Igbc, Indoor Air Quality Certificate By Scs Global. As Per Gem Pd Id-5116877-34411116017. Warranty Period: 30 Months After The Date Of Delivery Steel Chair With Cushion Seat Back & Arm-.Seat/Back Assembly: The Seat Should Be Made Up Of 1.2 ?0.1Cm. Thick Hot Pressed Plywood And Upholstered With Fabric Or Synthetic Leather And Moulded Polyurethane Foam. The Back Should Be Made Up 1.2 ?0.1Cm. Thick Hot Pressed Plywood Upholstered With Replaceable Fabric Or Synthetic Leather Upholstery Covers And Moulded Polyurethane Foam. The Back Ply And Foam Should Be Designed With Contoured Lumber Support For Comfortable Seating Posture. Mid Back Size 48.0Cm.W X 64.5Cm.H Seat Size 51.0Cm.W X 48.0Cm.D 2. High Resilience Hr Polyurethane Foam: The Hr Polyurethane Foam For Seat And Back Should Be Moulded With Density 45?2 Kg/M? And Hardness Load 16 ? 2 Kgf For 25% Compression. 3.Armrests:The Armrest Top Should Be Made Of Moulded Polyurethane P.U And Mounted On To A Fixed Type M.S. Tubular Armrest Support Which Should Be Chrome Plated. The Arm Support Has Static Vertical Adjustment Of ?1.5?0.05Cm. 4.Fixed Backrest: The Backrest Consshould Be Ts Of A Fixed Type Mechanism I.E. No Back Up/Down Adjustment. 5.Leg Frame Assembly: The Leg Frame Welded Assembly Should Be Chrome Plated, Made From 3.5 ?0.03Cm. X 1.5 ?0.02Cm. X 0.16 ?0.0128Cm. Thk Round M.S. Erw Tube And Provided With A Base Plate For Seat Fixing. Bidder/Oem Must Have Following Certificates: Iso 45001:2018, Iso 9001:2015, Iso 14001:2015, Iso 50001:2011 All Iso Certificate Should Be From Nabcb Authorized Agency, Bifma Membership, Bifma Level 2 & 3 Conforms To Ansi/Bifma E3-2014E Furniture Sustainability Standard, Greenguard From Ul, Green Pro, Griha, Aiota, Igbc, Indoor Air Quality Certificate By Scs Global. Warranty Period: 30 Months After The Date Of Delivery 1 Seater Sofa Overall Size : Width : 100Cm Depth : 99Cm Height : 98Cm Seating Height : 47Cm Leather/Pvc/Fabric:Pu, Pvc, Frame Material:Wood, Foam, Pu, Pvc, Sofa Spring, Flexible Belt, Pocket Spring . Seat Foam: Density, Type:35#Hard, Back Foam: Density, Type:35#Soft. Leg Material:Wood Density Of Cushion Of Backrest Material Kg/Cubic M: 28 Covering Material For Seat And Backrest : Leatherite Frame Structure Material And Size ?1 Mm: 18 Mm Thick Teak Plywood Colour Of Polish On Exposed Wood Frame Natural Brown Colour Of Covering Material Black. Bidder/Oem Must Have Following Certificates: Iso 45001:2018, Iso 9001:2015, Iso 14001:2015, Iso 50001:2011 All Iso Certificate Should Be From Nabcb Authorized Agency, Bifma Membership, Bifma Level 2 & 3 Conforms To Ansi/Bifma E3-2014E Furniture Sustainability Standard, Greenguard From Ul, Green Pro, Griha, Aiota, Igbc, Indoor Air Quality Certificate By Scs Global. Warranty Period: 30 Months After The Date Of Delivery Steel Almirah With Double Door-Almirah Heightexcluding The Height Of Pedestal ? 5 Mm 1155 Mm, Almirah Width ? 5 Mm900 Mm, Almirah Depth ? 5 Mm 430 Mm, Technical Specification Of Almirah Steel Generally Conforming To Bis Specification Is: 3312:2021 With Latest Amendment Type Of Almirah Steel Almirah Steel Shelving Cabinet With Partial Wardrobe, Construction Type Riveted Installation Free Standing, Pedestal Yes, Pedestal Fitted With 3 Mm Teflon Bush, Pedestal Height ? 5 Mm 125 Mm, Locker Required No, Door Type Hinged, Number Of Door 2, Number Of Hinges For Each Door 2, Door Stiffener Up To Full Door Height Provided Yes, Mirror Fitted No Mirror, Number Of Drawers Required No Drawer, Shelves Required Adjustable Number Of Shelves 2, Uniformly Distributed Load Udl For Shelves 60 Kgs. Wardrobe By Style No Wardrobe, Tie Hanger No, Colour Of Finish Prince Grey, Material :- Steel Sheet Material Crca Sheets Conforming To Grade Cri Of Is 513Part-1:2016 With Latest Amendment, Sheet Rounds And Flats N.A, Screws Conforming To Is 1365, Hanging Rod Material No Hanging Rod, Mirror Frame Made Out Of If Provided No Mirror Frame, Tie Hanger Made Out Of N.A, Stiffener Material Ms Sheet, Dimension-Locker Inside Height ? 5 Mm No Locker, Locker Inside Width ? 5 Mm N.A, Locker Inside Depth ? 5 Mm N.A, Drawer Height N.A, Drawer Width N.A, Drawer Depth N.A, Mirror Sizes N.A, Shelves Lipped Flange 35 Mm Bidder/Oem Must Have Following Certificates: Iso 45001:2018, Iso 9001:2015, Iso 14001:2015, Iso 50001:2011 All Iso Certificate Should Be From Nabcb Authorized Agency, Bifma Membership, Bifma Level 2 & 3 Conforms To Ansi/Bifma E3-2014E Furniture Sustainability Standard, Greenguard From Ul, Green Pro, Griha, Aiota, Igbc, Indoor Air Quality Certificate By Scs Global. Warranty Period: 30 Months After The Date Of Delivery Wooden Bed Side Table- Overall Size : Depth - 450.0 Mm Width - 440.0 Mm Height - 510.0 Mm Material : Body And Drawer Panels Of Bed Side Table Are Made Of 18 Mm Thick Prelaminated Particle Board. All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. Side Panels Are Made Of 18 Mm Thick Prelaminated Particle Board With Imported H.D.F. Foil Wrapped Decorative Trim Fixed On To It. Hardware : The High Quality Hardware Used Like Roller Slides, Hinges, Minifix, Dowels Is Of Make Hettich.. Construction : Knock Down Construction.Packets : 1 Packet. Finish :. 18 Mm Thick Prelaminated Particle Board Is In Walnut Shade. Bidder/Oem Must Have Following Certificates: Iso 45001:2018, Iso 9001:2015, Iso 14001:2015, Iso 50001:2011 All Iso Certificate Should Be From Nabcb Authorized Agency, Bifma Membership, Bifma Level 2 & 3 Conforms To Ansi/Bifma E3-2014E Furniture Sustainability Standard, Greenguard From Ul, Green Pro, Griha, Aiota, Igbc, Indoor Air Quality Certificate By Scs Global. Warranty Period: 30 Months After The Date Of Delivery
Supply of Executive Table To The Following Dimensions Of 1365 Mm X 680 Mm X 735Mm Width X Depth X Height With Following Specification. 1. Frame Material : Mild Steel 2. Table Top Material - Particle Board 3. Three Storage Drawers Shall Be Provided In Left-Bottom Side Of The Table To Keep Documents And Accessories. 4. Extra Storage Unit Includes Box And File Unitshall Be Provided In Right Bottom Side Of The Table . 5. The Panel Shall Be Made Out Of 18Mm Thick Pre-Laminated Particle Board And Th Tubular Frame Of 1.2Mm Thick Ms Erw Tube Which Will Make Strong And Durable Table. 6.The Pvc Edged Bonding Covering All The Four Sides Of The Pre-Laminated Particle Board Panel Brings 7. The Doubel Storage Unit Shall Be Fitted With Plastic Handle And A Cam Lock For Safety Handing Files And Accessories. Make And Model No. Godrej Inerio - Table T9 N 56101519Sd01125 Or Equivalent To Durian Or Nilkamal Only. Item Shall Be Supplied Along With Warranty Certificate. Warranty Period: 12 Months After The Date Of Delivery
