"नये भारत का नया Tender Portal"
Supply Of Set Of Items Required For Under Slung Main Compressor Of Wag-9/ Wap-7 Locos Consisting Of Two Drawings As Follows. A) Safety Sling For Main Compressor Of Wag-9/ Wap-7 Locos As Per Scrly. Drg. No. C/els/lgd/aux/4/39 Alt -1 Or Latest If Any. Qty/set. = 04 Nos. B) Set Of 'u' Clamp Assembly For Under Slung Main Compressor As Per Els/lgd/scrly. Drg. No. C/els/lgd/aux/4/38 Ref. Nos. 1, 2, 3 & 4 Or Latest If Any As Follows. 1) Ref. No. 1 : 'u' Bolt. Qty/set. = 12 Nos. 2) Ref. No. 2 : Base Plate. Qty/set. = 12 Nos. 3) Ref. No. 3 : Hex. Nut Suitable For M12 Bolt. Qty/set. = 24 Nos. 4) Ref. No. 4 : Spring Washer For M12 Bolt. Qty/set. = 24 Nos. Note: One Sample Set Of All Items Should Be Got Approved Before Effecting Bulk Supply.
Supply Of Set Of Safety Wire Rope Sling (for Under Slung Compressor) Consisting 02 Items:- (i) Wire Rope Sling Of Length Of 3.0 M, Dia 8.0 Mm,6x19 With Steel Core As Is: 2762:2009 And Wire Rope As Per Is: 2415:2004 Gr 1770 N/mm Square,qty-01 No. (ii) Thimble Suitable For 8mm (dia) Wire Rope As Per Drg. No. Tata/rs/misc/1064. Test Certificate: Sling Should Be Tested By Nth Or Any Other Govt Approved Test House. Certifcate Should Be Issued With Sling
Supply Of 8mm U Clip With Nut,plain Washer, Spring Washer For Safety Sling Provision As Per Annexure Iii Of Rdso /smi / 0242 Dt. 28-11-08
Supply Of Safety Sling Arrangement For Hanger Lever To Set List No. El-29140195 Rev. 0 & Drawing No. 1209-01.416-066, Ref. Nos. 1, 2, 3 & 4 Alt - Nil Or Latest If Any. Quantities For Reference Items To Be Supplied As Mentioned In The Drawing. Note: One Sample Set Should Be Got Approved Before Effecting Bulk Supply
Gem Bids For Supply Installation And Commissioning Of Safety Sling As Peritem 1 Of Attached Specification Document, Supplyinstallation And Fixing Of Safety Sling For Power Car As Peritem 2 Of Attached Specification Document, 150 Sqmmfeeder Cable As Per Item 3 Of Attached Specificationdocument, 6 Sqmm E Beam Copper Cable As Per Item 4 Ofattached Specification Document, Heavy Duty Coppercrimping Socket As Per Item 5 Of Attached Specificationdocument, Double Ended Jumper Plug Assembly As Per Item6 Of Attached Specification Document, Hand Opertaedhydraulic Crimping Tool As Per Item 9 Of Atachedspecification Document
Supply Of Additional Safety Sling For Compressor
Supply of Set Of Safety Sling For Compressor As Per Drg. No. Els/Vskp/2015/32.
Supply Of Set Of Safety Sling For Traction Motor Of Three Phase Loco.
Supply Of Fixing Cable Safety Sling For Push Pull Rod.
Gem Bids For Tools, U-Clamp Size- 1 By 2 Inch U-Clamp Size- 1 Inch U-Clamp Size- 2 Inch Magnet V-Block Size-1 Inch Withlocking Clamp Photo Imaging Paper Size- A4 Sizeqty In Packet Safety Belt Web Sling Capacity- 3Ton Length- 4 Meter Filler Wire Moc-316L Size- 1Mm Qty In Roll Filler Wire Moc-316L Size- 16 Mmqty In Packet Filler Wire Moc-316L Size- 24 Mm Qtyin Packet Filler Wire Moc-304 Size- 16 Mm Qty Inpacket Filler Wire Moc-304 Size- 24 Mm Qty Inpacket Filler Wire Moc-309 Size- 16 Mm Qty Inpacket Filler Wire Moc-309 Size- 24 Mm Qty Inpacket Hss Tap And Die Set Size- M14x 15Mm Analog Pressure Gauge Dial- 6 Inch Endconnection- 1By2 Inch Range- 25 Bar Analogpressure Gauge Dial- 6 Inch End Connection- 1 By 2Inch Range- 50 Bar Analog Pressure Gauge Dial- 6Inch End Connection- 1 By 2 Inch Range - 100 Bar Analog Pressure Gauge Dial- 6 Inch Endconnection- 1 By 2 Inch Range - 160 Bar Analogpressure Gauge Dial- 6 Inch End Connection- 1By2inch Range - 200 Bar Analog Pressure Gauge Dial-6 Inch End Connection- 1 By 2 Inch Range - 400 Bar Hot Glue Gun With 30 Nos Of Glue Stick Power-200W Pipe Wrench Size- 18 Inch Vacuum Pumpcapacity-1 2 Hp Rubber Mat Size- 1500X1000x25mm Air Plasma Cutter Welding Machine Withaccessories Power Hacksaw Machine With 10 Nosof Spare Blade Round Cutting Capacity- Min 300Mmcutting Blade Size- 400X32x16mm Number Of Speedstrokes- 3 Coolant For Power Machine Volume-5Litre Magnetic Drill Machine With Drill Bitsmaxrotational Speed- 450 Rpm Core Drilling- Min40mm Cutting Depth-Min55mm Stroke - Min150mm Bid Number Gem2025b6819933 Dated 24-10-2025 Bid Document1 85 1 1 Power- Min1100 Watt, Studs With Washer, Size-M16x2 Mm, Length-100Mm, Studs With Washer, Size-M18x2.5 Mm, Length-100Mm, Pipe Clamp, Size- 1 Inch, Pipe Clamp, Size- 2 Inch, Aluminium Ladder, Size- 5Feet, Dauti Seal, Size- 1 By2 Inch, Dauti Seal, Size- 1By 4 Inch, Dauti Seal, Size- 1 Inch, Spring Callipercompass, Size- 6 Inch, Portable Welding Machinewith All Cables And Fittings Arc And Tig Type, Capacity-300Amps, Hacksaw Frame, Size 12, Handhacksaw Blades, Size 12 X 1 By 2 X 0.025, 18Tpi, Spring Calliper Compass, Size- 12 Inch, Cuttingwheel 4 Inch, Metal Cutting Wheel, Size - 12 Inch, Metal Cutting Wheel, Size - 15 Inch, Grinding Wheel4inch, Buffing Wheel 4Inch, Nose Plier 6Inch, Noseplier Long Needle 12 X 8 Mm, Inside And Outsidecirclip Pliers, Size-150Mm Length, Moc-Steel, Slugging Spanner, Size 34Mm, Open Ended Sloggingspanners, Size 36Mm, Ring Spanner Set Size 6-32Mm, Open End Spanner Set Size 6-32Mm, Teflon Tape Size12mm X 12Meter X0.3 G Bycm 3, Safety Heighthelmets, Measurement Tape, Size 5Mtr 20 Mtr, Dialvernier Caliper 0-300Mm, Size 300Mm, Digital Verniercalipers, Size 300Mm, Snip Metal Cutter 8Inch, Trysquare Set 6 And 12 Inch, Allen Key Size 12Mm, Allen Key Size 14Mm, Allen Key Set Metric One Setcontains 10 Nos 1 Point 5, 2, 2 Point 5, 3, 4, 5, 5 Point5, 6, 8, 10Mm, Spiral Gasket, Size - 1Inch, Class - 600, Moc - Graphite, Spiral Gasket, Size - 1Inch, Class -900, Moc - Graphite, Asbestos Sheet Champion Oilgrade 59 2Mm Thik Approx Wt- 12Kg, Asbestos Sheetchampion Oil Grade 59 3Mm Thik Approx Wt- 20Kg, Aluminium Ladder, Height 8Feet, Cotton Gloves, Hss Drill Bit Set Size 1-13Mm, Screw Driver Slottedhead Dia 3, 6 And 10 Mm X Length 120, 230, 420 Mm, Centre Punch Size 6Mm, Centre Punch, Size - 8Mm, Electric Line Tester Range 100V-500V, C-Clamp 6Inch, C- Clamp Size 305Mm, Hydraulic Jacks 10 Tonnes, Magnetic V Blocks Size 2 Inches, V Block Hardened40x 40 X 50Mm, Pvc 1 Inch Flexible Pipe, Cylinderopening Key, Web Slings 5 Ton With 4 Meter, Webslings 2 Ton With 4 Meter, Web Slings 1 Ton With 1Meter, Bending Bit Tool Size 6, 8, 10, 12, 16, 22 And25 Size 6 To 12Mm Manual Hand Tube Bender Type And16 To 25Mm Bench Top Tube Bender Type, Emerypaper, Grade - 60, 80, 100, 180, 200, 220 Each Qty -50, Non Sparking Cylinder Key, Wd-40, Esd Safeantistatic Mat, Size- 50 Feet X 3.5 Feet, Thickness-2Mm, Spiral Gasket Moc- Graphite, Class- 600, Size- 2Inch, Spiral Gasket Moc- Graphite, Class- 900, Size- 2Inch, Cutting Machine, Size- 14 Inch, Fevikwik, 15Gram, Teflon Tape, Width- 1 Inch, Wall Clock, Type-Analog, Size- 18 Inch, Raised Face Flange Withsuitable Fasteners Washers, Size- 1 By 2 Inch, Class-1500, Cotton Rope, Size- 1 2 Inch Dia, Length- 15Mtr, Cotton Rope, Size- 1 Inch Dia, Length15 Mtr, Spiralgasket Moc- Graphite, Class- 600, Size- 1 By 2 Inch, Spiral Gasket Moc- Graphite, Class- 900, Size- 1 By 2Inch, Spiral Gasket Moc- Teflon, Class- Class- 600, Size- 1 By 2 Inch, Spiral Gasket Moc- Teflon, Class-900, Size- 1 By 2 Inch, Spiral Gasket Moc- Teflon, Class- 600, Size- 1 Inch, Spiral Gasket Moc- Teflon, Class- 900, Size- 1 Inch, Spiral Gasket Moc- Teflon, Class- 600, Size- 2 Inch, Spiral Gasket Moc- Teflon, Class- 900, Size- 2 Inch, Empty Snoop Bottle, //Bid Details2 / 85 Volume-200 Ml, Scissor, Length- 200Mm, Heavy Dutymallet, Size- 1.5 Inch, Heavy Duty Mallet, Size- 2 Inch, Hammer Medium Size, Shape- Club Type, Hammermedium Size, Shape- Ball Pin, Hammer Medium Size, Shape- Claw Type, Hammer Medium Size, Shape- Non-Sparking Type, Magnetic Sprit Level, Size- 4 Inch, Magnetic Sprit Level, Size- 6 Inch, Cylinder Dummyplastic Cap, Type- Male Type, Thread- Left Handthread, Thread Size- 5 By 8, Cylinder Dummy Plasticcap, Type-Male Type, Thread- Right Hand Thread, Thread Size- 5 By 8, Plastic Cap For Endfittings, Type- Male Type, Thread Size- M12, Plasticcap For End Fittings, Type- Female Type, Thread Size-M12, Plastic Cap For End Fittings, Type- Male Type, Thread Size- M14, Plastic Cap For End Fittings, Type-Female Type, Thread Size- M14, Plastic Cap For Endfittings, Type- Male Type, Thread Size- M18, Plasticcap For End Fittings, Type- Female Type, Thread Size-M18, Plastic Cap For End Fittings, Type- Male Type, Thread Size- M20, Plastic Cap For End Fittings, Type-Female Type, Thread Size- M20, Plastic Cap For Endfittings, Type-Male Type, Thread Size- M27, Plasticcap For End Fittings, Type- Female Type, Thread Size-M27, Plastic Cap For End Fittings, Type- Male Type, Thread Size- 1 By 2 Inch Bsp, Plastic Cap For Endfittings, Type- Female Type, Thread Size- 1 By 2 Inchbsp, Plastic Cap For End Fittings, Type- Male Type, Thread Size- 1 Inch Bsp, Plastic Cap For Endfittings, Type- Female Type, Thread Size- 1 Inch Bsp, Plastic Cap For End Fittings, Type- Male Type, Threadsize- 2 Inch Bsp, Plastic Cap For End Fittings, Type-Female Type, Thread Size- 2 Inch Bsp, Pencil Cell, Size- Aa, Pencil Cell, Size- Aaa, Vacuum Gauge, Range- 0 T0 760 Mm Of Hg, 1 By 4 Inch Quickconnector, Moc- Pvc, 1 By 2 Inch Quick Connector, Moc- Pvc, 3 Way Connector Moc Pvc, 4 Wayconnector, Moc- Pvc, Straight Connector, Moc- Pvc, Dummy Male Type 1By 4 Inch, Moc- Pvc, Dummy Maletype 1By2 Inch, Moc- Pvc, Umbrella, Canopydiameter- 42 Inches, Poly-Propylene Hose Pipe, Size-Id-8 Mm, Od-10 Mm, Poly-Propylene Hose Pipe, Size- Id-10 Mm, Od-12 Mm, Electric Motor, Capacity- 1 Hp, Hand Grinding Machine, Size- 4 Inch, Spot Weldingmachine, Rating- Less Than 5 Kva, Single Or Dualhead Option, Usage- Less Than Gauge 18, Aqt Oraquatak Series High Pressure Hose With Quickconnector At Both End, Aqt Or Aquatak Serieshigh Pressure Hose Pipe Connector, Water Filterinlet Nozzle
